Jump to content
SAU Community

power fc soon.....!!!!!


Recommended Posts

lixid, how do u expect to tune your powerfc and car effectively if you dont have a dyno? i mean there is always a road tune, but you just have sooo many different variables to look out for - how can you effectively tune a car whilst watching what the taxi in front of you is doing?

I think, spend the money on a decent workshop (i know this is hard to find) and be done with it. Your better off getting it done properly first time and not have to worry about it ever again.

My new ride comes within 8 weeks or so. I can't wait. PowerFC and front mount to go in, 40 and 60kw atw is a fantastic result guys! who did your tuning???

MY_R34GTT.jpg

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23266
Share on other sites

30-40 rwkw is a good gain so you should be happy with that.

dyno is just getting a result. dyno tune is more costly as it can take a while.

i just got mine tuned at bd4's and it cost me around $270. it can be more and it can be less depending on level of tune. i'd say yours will cost more as they will have to start from the begining remaping everything.

and, no a dyno tune is not necessary as the pfc comes with a basic map but i'd advise you get it to make most of the pfc. otherwise what's the point of getting pfc in the first place

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23272
Share on other sites

Guest lixid

ONARUN

my car looks the same as yours....

you got 60!!!!! that's alot man... i wish i can get 30-40kw out of it.

well

i will go to one of my friend's workshop, which i usually go for service and mods.

he doesn't have a dyno stuff. so it's hard to say how much power increase exactly. and i don't know how much rwkw i have now.

where do you guy usually go for dyno. and how much???

and when you people say dyno. do you mean dyno tune. or just get a result.....

is a dyno tune necessory???

by the way, how you guy put the little pic under you name??

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23219
Share on other sites

Originally posted by lixid

where do you guy usually go for dyno. and how much???  

is a dyno tune necessory???

i go to bd4's. just got one done for $270 and that was a light tune.

dyno tune is necessary once you get pfc to get the most out of it. otherwise don't bother with it.

yours will cost more than $270 i think as they'll need to remap most everything whereas mine was just a tweak.

j, as they say, it's plug and play

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23808
Share on other sites

No way Jimbo,,,,,Unless you can get the 2nd hand one to go back to factory defualts. If it keeps it's memory from the last car,,,you'll have to get it tuned to yours. Onarun told me his kept it's memory when his battery went flat and had to change it.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23948
Share on other sites

Oh, sorry, I meant just in terms of installing thats all I'd have to do .... I'd then promptly be taking it to Hills to have it dyno tuned. Just wondering if I'd have to pay them to dyno tune and install, or just the tune ;)

It looks like I'll be able to get one with a hand controller for about $1000, which is a bargain.

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23954
Share on other sites

Jimbo,,,Get Hills to install it,,,,much safer,,,you don't know what settings the last owner had. The Dyno is the be all and end all of a PFC.

Does he have 2,,,,$1000 for the puter and controler is real cheap buddy.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23971
Share on other sites

Jimbo: thats seriously cheap for a PFC AND controller.Make sure there is nothing wrong with it before you buy it.

Good second PFC's alone are going for significantly more than that.....if its all good then good score mate ;)

I will be getting a Power FC after the next round of exterior mods on my car. woohoo

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-24042
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...