Jump to content
SAU Community

Garrett T4

drgnball34

By drgnball34,
in Engines & Forced Induction

 Share

Recommended Posts

drgnball34 Rising Star

drgnball34

Posted
Posted

Need some feedback on a garrett t4 with t3 flange.

inlet: A/R 0.60

Exhaust: A/R 0.84

rated at 600+ hp

Pretty new to all the different types of turbos n their specs. confuse as to what all the nunbers mean. But any of you know anything about this setup.. Looking a extracting the max power of of my stock Neo Rb25det. Hopefully 380rwhp :( the guy told me its a big mutha!!! Wondering if its gona be laggyin heaps? Will i need a high mount or will it fit to the standard underneath?

Link to comment
https://www.sau.com.au/forums/topic/110067-garrett-t4/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

please do a search on neo turbo upgrades, it has been covered a lot.

the turbocharger upgrade will cost you i would say around 5k at the very least. without any more specs the turbo sounds too large for your power output and will be extra laggy.

you will need

3" turbo back exhaust

aftermarket ecu

aftermarket injectors

cold air intake

front mount intercooler

tyres

suspension

boost controller

airflow meter

standard manifold is ok

i have seen at least two rb25 neo's max out at 250rwkw on those sorta parts due to the extra compression they run (i think thats the cause). so its pointless having a 450rwkw turbo if you can never ever make that power

Link to comment
https://www.sau.com.au/forums/topic/110067-garrett-t4/#findComment-2028964
Share on other sites
drgnball34 Rising Star

drgnball34

Posted
  • Author
Posted
please do a search on neo turbo upgrades, it has been covered a lot.

the turbocharger upgrade will cost you i would say around 5k at the very least. without any more specs the turbo sounds too large for your power output and will be extra laggy.

you will need

3" turbo back exhaust

aftermarket ecu

aftermarket injectors

cold air intake

front mount intercooler

tyres

suspension

boost controller

airflow meter

standard manifold is ok

i have seen at least two rb25 neo's max out at 250rwkw on those sorta parts due to the extra compression they run (i think thats the cause). so its pointless having a 450rwkw turbo if you can never ever make that power

Yeh currently i've got a 3'' inch turbo back exhaust, intercooler, pod filter + cai. Ive ordered apexi power fc, 650cc injectors, bosch 044, sard regulator, and avc-r.... Waiting for it to arrive is the hard part! Dnt know of any reason to have a z32 meter...i can pretty much control the a/f from the fc huh? Or will it be to much messing around? If the compression ratio is gona give me troubles then i will get a thicker gasket.. Pushing the rb25det to the limits... Any point having a oil cooler...Or is it realli only used for drifting?

Link to comment
https://www.sau.com.au/forums/topic/110067-garrett-t4/#findComment-2028984
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

curious as to what injectors you've orderded? the only drop in injectors are nismo 480ccs. you can only use larger ones with chaning the fuel rail.

basically they've reported it detonating over 1bar ish on stock neo25 internals. at least it sounded like that, i could be wrong

my only guess is this is due to the different compression they run.

i think you will max out the stock neo25 airflow meter.

so are you still going to buy at 600hp even though you only need 300hp of it?

Link to comment
https://www.sau.com.au/forums/topic/110067-garrett-t4/#findComment-2029005
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...