Jump to content
SAU Community

Recommended Posts

they buy u what u want ;) *big hugs to the other half* :D

Photos_097.jpg

Inside the box -

Photos_098.jpg

Parts laid out -

Photos_101.jpg

the body (fresh out the box unpainted still)-

Photos_100.jpg

close up of parts -

Photos_103.jpg

the instructions -

Photos_105.jpg

I bought some paints i didnt have so i can paint it soon (ive done models in the past).

The detail is pretty good, it has a full interior (dash etc.) and rubber wheels etc...i can paint it my choice of colour, but im going for the metallic black.

i'll post pics of the build. :drag:

Link to comment
https://www.sau.com.au/forums/topic/111262-bithrday-prezzies-56k-sucks/
Share on other sites

I bought mine from Hobby Habit on Main Nth Road.

They have a large range of others (which ive got my eye on) including 33gtr's, Pennzoil Nizmo, Calsonic, 34's, 180's, gtst 33's, silvias (s13/s15). The damn paint costs about the same as the model was to buy, but if you have built some in the past it works out u only need a few colours at a time.

Go to the tamiya website to see the full catalogue.

Oh yer, Hobby Habbit have one i saw im getting next - The Homer (includes a small homer) :drag:

How much are they?

The model as you see it is about $34

If you dont have the paint, it becomes expensive, as it uses 18 different colours. I only had to buy a few colours as ive done previous models in the past, and the more kits u buy later, the less paint u need to buy.

Happy B'day. :)

Looks nice, when will you get around to putting all the bits together?

Not going to be like the 'real' R32 is it... You know.. that hks manifold sitting shed.... the bonnet and guards that are sitting in the shed.

hehehe lol

Happy B'day. :mellow:

i had a awsome model of a purple 34 gtr on my 21st bday cake that my mum got, its pretty detailed, and cost like $80 from some hobby shop, ill post pics when i get a chance :) (i tried 2 return it n get blue but they said no :happy: )

Nice present, looks nice. I thought I would let you know that I have a !/12 scale nizmo R32GTR model. It has rubber tyres, working steering, mesh grill, hinged doors,turbo's brake disc's and even metalic badges . I have been to lazy lately to even start to assmble. lol This one was $300 though and limited to a few hundred models. I got it for my birthday to.{two years ago}This one is mainly assemble with screws and springs and will take time to assemble {many hours} .Its about 375mm long. Got it from complete hobbies main north rd brahma lodge.

I have other models to finish first 1\32 A10 thuderbolt , 1\35 apache helicopter etc .

If you want a look, I might be able to post pic's or maybe catch up with ya so you can have a look.

Any way nice present! :happy:

Straightline Automotive on Port Road also has these Tamiya models, I think he has a couple of 32 GTRs down there at the moment. They sold like hot cakes at the last Extreme Horsepower show.

He also has some of the Initial D already built black 32 GTRs which are pretty hard to find if you can't be bothered building one up.

I just got a different brand 32 GTR that i am building up. Mine doesnt have an engine in it though :D

Here are some pics of a 2004 34 Nismo Race Car that i built last year

post-26183-1143538734.jpg

post-26183-1143538813.jpg

Edited by Whiplash
  • 1 month later...

couple of update pics :)

Havent been working on it much lately....but meh...

(images attached for now as sau hosting is down atm) will edit later...

Engine bay still have brake stuff to go in, and painted.

Body is being sprayed and decals put on the exterior...as well as lights etc.

post-3692-1146401291.jpg

post-3692-1146401385.jpg

post-3692-1146401440.jpg

post-3692-1146401542.jpg

post-3692-1146401686.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...