Jump to content
SAU Community

Recommended Posts

So looking at the SK pic, in standard trim, the subframe floats up and down on those mount points, and the pinapples fill a that gap.

If you get Aluminum ones, sound is tramitted through the frame.

For all round performance use the bottom ones (non split)

For drift tilt the diff back using btm front, top rear.

For drag tilt it forward using top front, btm rear.

"I have the otomotto kit and i have 2 large split and 2 small non split"

This would be a kit designed for drag then.

The whiteline doesnt have the scope for drift? and if you put all 4 budshes in the rear it is a marginal drift setup?

EDIT! The whiteline doesnt have the scope for drag?

couldn't remember if you had the pinapples or not but from memory your car was quiet, handled awsome and had the same firm ride in a straight line as mine with its standard springs and uprated shocks (on car when bought). Cheers for letting me know you did have them for our spin :thumbsup:

P.S. enjoying the job? had to do a couple of your call outs. Sick of being told "can't make it" yet?

Edited by ellie
The whiteline doesnt have the scope for drift? and if you put all 4 budshes in the rear it is a marginal drift setup?

Not so, you put the small split rings above the subframe at the rear and the large non split below the subframe at the front. This give max antisquat which reduces the rear end grip, making it the ideal setting for drift. It's the bottom left hand drawing in the instructions.

:thumbsup: Cheer :)

I have most definitely used the drag setting (maximum squat) on a few cars that I have worked on, as well as my own. The usual improvement in 60' times is 0.15 second from the subframe alignment.

That setting is the lower left in the instructions (maximum traction). With the small, split rings on top at the front and small, non split rings on the bottom at the rear.

:( cheers :)

most people i've spoken to using them in drift cars, go for either "All Round" or "grip"

As someone mentioned above, and has been confirmed with a few people i've spoken to who have used them in "drift" setup, they are stupidly slippery and becomes more of a hinderance than a benefit if the car is properly set up in the first place.

Any problems with understeer or problems loosing traction for drift should be overcomed using different wheels/tyres or different stabiliser bar settings.

how long generaly should the whiteline pineapples last for ??

i got mine about a year ago but i think there starting to die now...

that clunking noise has kinda come back now when i turn and stuff..

hmm maybe ill take em out and see if there cracked or something

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...