Jump to content
SAU Community

Rb26 Motec, Injectors, Cams, Cam Gears, Power Fc

varun_gtr
 Share

Recommended Posts

varun_gtr Enthusiast

varun_gtr

Posted
Posted (edited)

****Tomei step 1 cams for RB26, 9.2mm lift 260 degree duration inlet and exhaust. Perfect for a street car work well and maintain drivabilty. Tough sounding lumpy idle can be run with a standard ECU, work well with adjustable cam gears. Exhaust cam is brand new has not been run paid $720 for new exhaust cam alone, inlet cam has done nearly 10k. $1000 negotaible.

****RB26 HKS adjustable cam gears, puple center with green outer, done nearly 10k on engine. $350.

****Nismo 550cc injectors for RB26 or to suit any top feed injector rail. direct plug in for RB26 genuine nismo item no cutting and joining new plugs to fit. $750.

****Power FC brand new with hand controller 32 & 33 RB26. $1300 ono.

****Motec M600 with complete loom and brand new 3 bar map sensor for any 4or6 cylinder no extra features enabled, features can be enabled cheap if u would like any. has nitrous control already wired into the loom. if any serious buyers 4 this one will negotiate price.

will try to take sum pics asap. urgent sale please email me at [email protected] or sms me on 0401376402. Thanks

Edited by varun_gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...