Jump to content
SAU Community

16x7 Sparco Rims And Hybrid Gt Spec Intercooler

JnJ
 Share

Recommended Posts

JnJ Experienced

JnJ

Posted
Posted (edited)

post-22225-1143703342.jpgpost-22225-1143703309.jpgpost-22225-1143703284.jpgpost-22225-1143703247.jpgpost-22225-1143699456.jpgpost-3069-1125382738.jpg

Im helping my friend sell his rims and intercooler, Rims are sparco and 16x7 multi stud, dont know the offset jst ask for pics if needed, 1 rim has a minor rash but no buckles or anything, the tires are not in best condition so would need to change the tyres, he'll let these go for $350 o.n.o

Cooler's now SOLD.

He's selling these items due to pay some debts. Willing to post at buyer's expense, otherwise preffered pickup, located in sydney fairfield.

no time wasters pls only those who are genuine interested and willing to buy thx.

contact me on 0431 555 509 or leave me a pm

cheers.

post-22225-1143699480.jpg

Edited by JnJ
KamikazeR33 Grand Master

KamikazeR33

Posted
Posted

i had a set of these in 17' but a mate decided to roll his car n write em off

these come with the centre cap n dish?

if ur mate is willing to send them ill take em

otherwise i think i might have a mate who is picking up a supra who might grab them for me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • r32-25t
      R32 gtr transmission strength, billet plate

      By r32-25t · Posted

      Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...