Jump to content
SAU Community

Recommended Posts

R33 series 1 gtst with 3ltr Rb30 bottom end (instead of 2.5ltr) Motor done approx 15000km

Located near Gosford NSW

**has 12 months Rego***

Details

*RB30 block

*Arias Forged Pistons (20 tho oversize)

*Shotpeened rods

*ARP rod bolts

*New rod Little end bushes

*New ACL main and big end bearings

*Mild Head port and polish + full head service

*3 layer metal head gasket

*all new gaskets, seals, welsh plugs etc

*Custom oil catch can and breather

*Garrett GT35/40 dual roller bearing turbo

*Xforce high mount stainless exhaust manifold

*50mm external waste gate and screamer pipe

*3 inch exhaust turbo to cat with 3 inch cat. 3.25in cat back with stainless Jasma rear muffler.

*Custom inlet Plenum and EF falcon throtle body

*Hybrid bar and plate intercooler

*Turbo smart type3 blow off valve

*NOS brand nitrous fogger kit and bottle

*600cc injectors

*Bosch 044 external fuel pump

*Custom 1.5ltr surge tank

*Walbro high flow intank pump

*malpassi fuel pressure reg

*Wolf3d engine management

*Apexi electronic boost controller

*PLX Wide Band air/fuel ratio meter with gsensor and laptop data logging

*Xtreme extra heavy duty 5 puck ceramic button clutch (1200kg pressure plate)

*19 inch zenetti kaotic rims 19x9.5 (265/30/19) rear and 19x8.5 (235/35/19) front

*KYB lowered springs and shocks

*White line rear camber kits

*GREDDY electronic boost gauge with recall and warning light

*GREDDY electronic oil temp gauge

*GREDDY turbo timer

*TRUST short shifter kit and knob

*Pioneer cd/mp3 player

*Pioneer front splits and custom door pods

*Pioneer rear 6 inch speakers and custom parcel shelf

*Sony explode 12 inch sub and box (sub damaged but still works fine)

*Boss 4x75wrms amp

Car has produced 301kw (403hp) at the rear wheels on 18psi, will make more with more boost. Set of cams and larger exhaust housing will see 350+ Has done a 12.1@ 118mph on a 39degree day with lower boost and no NOS. Should Do high to mid 11 on cooler night without nos and mid to low 11 with NOS Email or ring with any question [email protected]

Asking $25,000 or best offer

0422802102 Ask for scott

post-10986-1144030543.jpg

post-10986-1144030668.jpg

post-10986-1144030695.jpg

post-10986-1144030731.jpg

post-10986-1144030772.jpg

post-10986-1144030825.jpg

post-10986-1144030851.jpg

post-10986-1144030877.jpg

post-10986-1144030908.jpg

post-10986-1144030938.jpg

post-10986-1144031257.jpg

Edited by OFENSV

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...