Jump to content
SAU Community

I need help to look for this please :)


Recommended Posts

HELP!

Been trying to find some Series 1 R33 Grillies with the red 'S' and couldn't find any. The one with the black mesh. spoke with skyline33 and had some Series II, but won't fit in my car as we tried to push them in. Look and advertised in the WTB section and no one reply.. Does anyone know any place in Melbourne which stocks these? wreckers? anywhere?

here's a pic which i took off some dude , but he's in sydney :D

Cheers all...

Link to comment
https://www.sau.com.au/forums/topic/11266-i-need-help-to-look-for-this-please/
Share on other sites

Originally posted by nismoR34

Get the chrome one from justjap - , paint it if you wish...  

This one says *Skyline GTS-T Grill Badge  $25* I think its the series 1 badge [different listing to series 11]  

P0002206.JPG

that photo is of a bonnet badge off a series II R33

Why don't you order it through unique motorsport, they also have those eye lid covers.

http://www.uniqueautosports.com

R33 type 1 grill with mesh $195

http://202.139.242.57/Images1a/Skyline%20p...parts/grill.jpg

R33 Series 1 eye lids $180 pair

http://202.139.242.57/Images1a/Skyline%20p...rts/eyelids.jpg

You can also get the standard GT-R style grill and attach the chrome badge to where the GT-R would go. I've done that on mine and I think it looks ok. Although i don't have a photo of it currently unfortunately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
    • Light should be a pressure switch, not a sensor.
    • The pressure light likely has a different sender to a pressure gauge, its been too long for me to remember for sure. Just have a look for another sender down near the oil filter. If you are confident in your rewired pressure sender reading correctly, you can be pretty sure it is just the dash light's sender failing, it is a pretty common thing.
    • It would be nice to see the result, but instagram is a click too far
×
×
  • Create New...