Jump to content
SAU Community

I need help to look for this please :)


Recommended Posts

HELP!

Been trying to find some Series 1 R33 Grillies with the red 'S' and couldn't find any. The one with the black mesh. spoke with skyline33 and had some Series II, but won't fit in my car as we tried to push them in. Look and advertised in the WTB section and no one reply.. Does anyone know any place in Melbourne which stocks these? wreckers? anywhere?

here's a pic which i took off some dude , but he's in sydney :D

Cheers all...

Link to comment
https://www.sau.com.au/forums/topic/11266-i-need-help-to-look-for-this-please/
Share on other sites

Originally posted by nismoR34

Get the chrome one from justjap - , paint it if you wish...  

This one says *Skyline GTS-T Grill Badge  $25* I think its the series 1 badge [different listing to series 11]  

P0002206.JPG

that photo is of a bonnet badge off a series II R33

Why don't you order it through unique motorsport, they also have those eye lid covers.

http://www.uniqueautosports.com

R33 type 1 grill with mesh $195

http://202.139.242.57/Images1a/Skyline%20p...parts/grill.jpg

R33 Series 1 eye lids $180 pair

http://202.139.242.57/Images1a/Skyline%20p...rts/eyelids.jpg

You can also get the standard GT-R style grill and attach the chrome badge to where the GT-R would go. I've done that on mine and I think it looks ok. Although i don't have a photo of it currently unfortunately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...