Jump to content
SAU Community

Recommended Posts

if your looking for a good front stage i would recomended getting 6.5 inch splits.

as for brand go into your local car audio place and have a listen to a few diffrent ones and chose the one you like the best.

if you chose to get splits make sure you get an amp to utilise them.

mr 32

Link to comment
https://www.sau.com.au/forums/topic/112700-32-speakers/#findComment-2077581
Share on other sites

yeah, definately go the 6.5" splits, just use some MDF and make a bracket for them and off you go...

as for brand, what mr 32 said, goto a car audio place and have a listen, make sure all the settings on the head unit you are testing off are set to flat, and the loud is off too, gives a better becuase you want the flat sound of the speaker to be the best sounding compared to othe ones, not the modified or bass boosted signal...

Link to comment
https://www.sau.com.au/forums/topic/112700-32-speakers/#findComment-2077619
Share on other sites

as long as you make sure the magnets are going to clear the window when it's down, 6.5" splits are very nice in the front, fit i there pretty easy too... my mtx's have heaps of room between the window and the magnet, kenwoods are pretty thin too, not sure about pioneer...

post-12416-1144420319.jpg

Link to comment
https://www.sau.com.au/forums/topic/112700-32-speakers/#findComment-2079861
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...