Jump to content
SAU Community

Recommended Posts

Hi um i have been wondering and debating with my friends for quite a while, what makes the BOV's (or the majority of) on VL turbo's sound so bad? Like normally i dont mind the tshhhhhhh sound but the VL turbo's go tsh tsh tsh tsh tsh like in fast succesion at a high pitch and its hilarious. I have noticed HKS sequential BOV's which i assume let the air off out of 2 openings and thought perhaps this could be the cause of queerness. Also i was wondering if it could be that the BOV is like loose or far to small or something? Like its slapping open then coming back down on itself and being slapped open again by the air rushing out. Could it be like absurd amounts of compressor wheel surge or something?

I know thats not really skyline related but well i dont know a huge amount about turbo'd cars and have been laughing at VL's for like 5 years trying to figure out why they (or the vast majority of) them sound so gay. ( and they got like r31 engines in em right?)

Link to comment
https://www.sau.com.au/forums/topic/112733-hilarious-vl-turbo-bov-sound/
Share on other sites

That noise you are reffering to is called compressor surge. It personal choice whether you like it or not but the reason why it makes that noise becasue as you take your foot off the throtle their is no BOV for the air coming from the turbo to ecscape so it goes back out through the turbo making that tsh tsh tsh tsh noise.

No blow off valve & no intercooler

They do have an intercooler, finding a decent picture of a stock RB30ET engine bay is the difficult part

nissan_motor_gerry.jpg

See right before the throttle body, that is a factory VL Turbo intercooler.

It can still make that sound with that crossover pipe because it doesnt have a BOV(im pretty sure) that tiny cooler thing isnt really going to effect the compressor surge. If its taken you years to work out what that noise is well you havnt been round very long cause theres normally a thread about it weekly

It can still make that sound with that crossover pipe because it doesnt have a BOV(im pretty sure) that tiny cooler thing isnt really going to effect the compressor surge. If its taken you years to work out what that noise is well you havnt been round very long cause theres normally a thread about it weekly

what

ahh but my car doesnt have a bov and doesnt make the queer noise. Is it because of a larger turbo size? Like more air banking up and rushing back into the turbine when ur intake(?!?) closes makes the noise right, so a bigger turbo would produce more of that and make more of a noise out of it?

They do have an intercooler, finding a decent picture of a stock RB30ET engine bay is the difficult part

nissan_motor_gerry.jpg

See right before the throttle body, that is a factory VL Turbo intercooler.

lol, that's not much of an intercooler :)

r32 gts-turbo- when i got a new motor fitted in my skyline rb25/30, and at that time i didnt have a bov for it (now it does) it made the exact noise but yeh i didnt mind it too much, but mine flutters at low psi then has the usual bov whoosh at higher boost levels

ben...

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...