Jump to content
SAU Community

Brand New T04e Turbo.

habibz_r33
 Share

Recommended Posts

habibz_r33 Collaborator

habibz_r33

Posted
Posted

Brand new T04E turbo for sale

Specs:

.57 trim front wheel in

.60A/R compressor cover housing.

.64A/R rear exhaust housing

Internal gated.

T04E internals from Garret with T3 rear housing

this means bolt on quick spool for R32,R33, R34, VL TURBO, and many other cars which run the T3 rear flange.

ECU Retuning is not needed* still able to make 200+rwkw on low boost(10psi or so), but its best to have retuned ECU to suit the turbo and it can make around 250RWKW on high boost.(18+)

Brand new in box

Asking $600

Any questions please ring: 0421 795 757 or email: [email protected]

Sth East suburbs Vic. can arrange pick up or delivery.

Cheers.

post-14144-1144588923.jpg

post-14144-1144588933.jpg

Link to comment
https://www.sau.com.au/forums/topic/112968-brand-new-t04e-turbo/
Share on other sites
habibz_r33 Collaborator

habibz_r33

Posted
  • Author
Posted
ebay turbo, been there and learnt that lesson the hard way.

Lol yeah an ebay turbo and works fine, nothing wrong with buying off ebay just like buying somethin from someone from anywhere else, i picked this item up my self from a genuine buyer but no longer installin it in my car since i decided to sell the car. Theres nothin wrong with the turbo and its brand new, cheap and works as guaranteed from previous owner. It was in melbourne and has no problems so if ur not interested then dont bother replying, cheers.

Selling it for $550, needs to go.

R8D-R33 Contributor

R8D-R33

Posted
Posted

i have the same turbo on my sr2o 180, ... i've had this turbo on my car for about a year now and had no problems at all, i made 227rwkw on 1 bar with FMIC, walbro pump and 3in exhaust (running a bit lean) it pretty responsive on my sr so i think it would be an great turbo for the RB25, i have no regrets buying it

good luck bro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...