Jump to content
SAU Community

Strange basket looking thing.....

Lozza150
 Share

Recommended Posts

Lozza150 Proficient

Lozza150

Posted
  • Author
Posted

No sorry guy's i can't provide a photo...due to one of our Cruiser girl's breaking the camera last week....

For those that have Skyline's if you can stick your head right under (if it's there) it will be bolted to the steel just down from the rear wheel....

ill try to locate a camera.....

Loz

akeenan Grand Master

akeenan

Posted
Posted

ok i had a bit of a look under mine and im not sure if im looking at the same thing as you...ok but here goes

on mine i see this black i guess basket looking thing with vents in it....and it is bolted into the rear panel...as far as i can tell this is just a blastic cover to protect the things on the inside... as my car is different to most other r33's i have a resivor in the boot for my active diff. my plastic basket thing i would say is there to protect this and its contents eg such as the hose coming out and going to the diff and also there are a few other gizmos in there that may be related not sure??

Lozza150 Proficient

Lozza150

Posted
  • Author
Posted

Left or right side...... on the exhaust side...(LHS) There is a hose and vent thing on mine,i think that is for runoff of something...is there anything on the otherside..... That's where the one in question is

I thought it might be a secret compartment for something.... but it is exposed to the elements so that theory went out the window....

surreal Community Regular

surreal

Posted
Posted

Prolly a vent into the bottom side of the boot. Have a look to see if it has a rubber flap deal, or, from the inside of your boot take the trims out (drivers side) and ferret down a bit and you should see the vent and inside of the basket thingo....if it is the thingo I am thinking you mean....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Question about BoV on RB25DET NEO

      By joshuaho96 · Posted

      Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • drifter17a
      Rb25 trigger kit and timing misalignment

      By drifter17a · Posted

      Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
    • Kapr
      Question about BoV on RB25DET NEO

      By Kapr · Posted

      Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
    • Ozdavroz
      ATCC Amaroo Park 1987

      By Ozdavroz · Posted

      Yep that's pretty much what I want to see. Racecars that look and sound like the Group A but with newer tech underneath to make them faster and safer. I'm sure there's enough VK-to-VN commodore, E30 BMWs and Foxbody mustangs shells around to make up a decent number of cars with hopefully a couple of sierras, rx7 and R31s in there too. 
    • robbo_rb180
      WTB RB25 Gearbox NSW / central west

      By robbo_rb180 · Posted

      Contact Jessestreeter.com/Skevas Racing/JustJap for a new r34 rb gearbox or go a cd00# conversion. No point playing with unknown condition gearboxes.
×
×
  • Create New...