Jump to content
SAU Community

Drop DB of Exhaust

Guest INASNT

By Guest INASNT,
in General Automotive Discussion

 Share

Recommended Posts

Lozza150 Proficient

Lozza150

Posted
Posted

what if you put on the original pipe to the cat and then leave the (bigger one)

on from the cat back it might reduce it enough.....?!?!?!??

worst to worst.... fail the test.... fit stockie..... redo test..... drive around for a mnoth with stock on... then refit bigger....

or chat to an exhaust place and see if they can help you ....

loz

Leewah Veteran

Leewah

Posted
Posted

Richie,

That maybe true but as far as the EPA are concerned, they tested my Nissan Skyline with my number plates :shake:

INASNT, if yr really worried bout your car failing, find someone with a stock R33 white GTSt and change rego and complience plates over and you'll be fine.

Trust me. I know from experience :)

Originally posted by ice180

leewah your car didn't pass the test

a swapsie was done with another stock gtr same colour - plates and rego label swapped and bob was your uncle....

Guest INASNT

Guest INASNT

Posted
Posted
Originally posted by Leewah

Richie,

That maybe true but as far as the EPA are concerned, they tested my Nissan Skyline with my number plates :shake:

INASNT, if yr really worried bout your car failing, find someone with a stock R33 white GTSt and change rego and complience plates over and you'll be fine.

Trust me.  I know from experience :)

my exhaust aint that loud, but louder than 90db at 3000rpm.

i want to pass first time, cant be ***ed wasting my time going there again

MotoX Veteran

MotoX

Posted
Posted

also, over here in QLD, i know this isnt realated, but we have 2 DOT places and they are so full that its not funny. when u get done, u might have to go to the pits and book a time in to get it checked, theres now a 2month wait to get ya car checked.

so i sugest u do it legal and u wont have to worry. do it illegal and be prepaired to wait.

btw i dont know if them butterfly shutters are illegal but i dont see why they would be.

and they would restrict some power as the flow would not be as good. but this allows you to run a bigger exhaust diamater. so i dunow.

Guest INASNT

Guest INASNT

Posted
Posted

yep got 83 db, with the stock cat back exhaust!

they revved it to nearly 5000rpm, if it went over 90db i was gonna tell them they r only meant to rev it to 3200rpm as stated in the rta regulations. I let em off coz they were real nice guys and idnt cause me any grief.

Leewah Veteran

Leewah

Posted
Posted
Originally posted by INASNT

they revved it to nearly 5000rpm, if it went over 90db i was gonna tell them they r only meant to rev it to 3200rpm as stated in the rta regulations.

And you all thought I was nutz when I said that they would rev it out to 5k.

They have their own regulations down there and will rev your car simply coz they can.

Guest INASNT

Guest INASNT

Posted
Posted
Originally posted by Leewah

And you all thought I was nutz when I said that they would rev it out to 5k.

They have their own regulations down there and will rev your car simply coz they can.

dont think they have their own regulations i think they were just revving it that high coz it would have registered like 75 db at 3200rpm. U can always pull the regulations out if it went over 90db at 5000rpm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      New R32 owner soon

      By Duncan · Posted

      Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • bardabe
      1992 R32 GT-R Race Car

      By bardabe · Posted

      I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • Kapr
      Oil pan for RB25DET NEO Stagea "version"

      By Kapr · Posted

      So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Rezz
      New R32 owner soon

      By Rezz · Posted

      Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • Keeper
      SAUNSW - Cruise - Albion Park Aviation Museum - 9th August

      By Keeper · Posted

      shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...