Jump to content
SAU Community

Recommended Posts

Item: Nissan S12 Gazelle

Location: Ipswich

Website: None

Reason for Selling: Moving onto bigger and better

Price and Payment Conditions: $7000

Extra Info:

Engine:

#RB20DET silver top

#HKS 25/30 turbo

#Hybrid FMIC, mandrel bent aluminum plumbing

#K&N filter

#3inch exhaust from turbo back, cannon muffler

#Customer PWR cross flow radiator with header tank

#Walbro 550hp in-tank pump

Driveline:

#R32 GTS-t 5speed manual

#NPC heavy duty 3200lbs organic clutch

#Custom 1 piece tailshaft

#Gtir LSD installed

#Tomei short shifter

#Volk 16x7 and 16x8 wheels (small dish)

Brakes & Suspension

#Power steering

#R32 GTS-t 4 piston brakes

#S13 front lower control arms

#S13 front hubs

#S13 JIC front coilovers (rebuilt)

#Kmac Z31 rear springs (300lbs 70mm lowered)

#Es9000 hilux 4x4 rear shocks

#Adjustable castor rods

#Cefiro front sway bar

#Poly rear subfame bushes

#Poly rear control arm bushes

#Poly castor rod bushes

#Poly front control arm bushes

#Customer rear subframe capable of 0deg camber with lowered springs

Interior:

#Jap drift steering wheel (white with green glitter)

#Alloy shift knob

#Jbl speakers

#Battery mounted in boot

Pictures: Will get more pictures on request

Contact Details: Post here or call 0403 373 911

Email: [email protected]

post-103-1145777517130191429.jpgpost-103-11457775481003077327.jpgpost-103-1145777579535867952.jpg

Link to comment
https://www.sau.com.au/forums/topic/114651-rb20det-s12-bne/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...