Jump to content
SAU Community

Recommended Posts

but just bcoz they are on the other side of the world etc, doesnt mean they can just get slack on there costomer service. i mean u can buy some stuff off ebay from all over the worlds and it arrvies on time. maybe they are waiting on the stuff to arrive to them from where ever they get it from first, but dont pass that info onto the customer bcoz ppl will be a bit complacent handing over money to some one who states they dont already have to goods they are paying for. just a theory.

if ya cant handle the long ass waits like 3 months / 5-6 weeks (which i think is way to long) use www.perfectrun.com.au everything i ordered has been here within a week to ten days max except a trust radiator cuz trust was outta stock..cool thing is ya can call em up any weekday and they always reply to mails within a day..if ya cant see the part ya want on there site give em a url to the part ya want and they will get it np

i mailed greenline.jp bout a clutch overhaul kit last week and still aint gotta reply..

Edited by thizzle

ive used nengun, greenline and perfect run. ive found perfect run are the best all round, price & service. had major problems with nengun involving a power fc i organised for a mate where he got slugged a couple of hundred for customs. also a roll cage that was sent to melbourne instead of brisbane and after waiting 3 months he had to pay for the shipping from melbourne to brisbane out of his own pocket.

Hahah, just look at some of these sheep, they all want Nengun’s babies as he is a sponsor of this site.. :thumbsup: Some one else in here wants some one else’s kids as well I think... :D Opp's did I post that out loud ;)

It’s all about customer service, and this isn’t the first time some one has had problems with Nengun.

Gotta use Greenline Brad, it’s all about Greenline.

Hahah, just look at some of these sheep, they all want Nengun’s babies as he is a sponsor of this site.. :P Some one else in here wants some one else’s kids as well I think... :D Opp's did I post that out loud ;)

It’s all about customer service, and this isn’t the first time some one has had problems with Nengun.

Gotta use Greenline Brad, it’s all about Greenline.

josh perhaps, however i have had bad experiences with greenline and never had any probs with nengun.

im not really keen on anyones babies except squizz.

if i was to have a bad experience with nengun id be sure to take my business elsewhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
    • -10 is plenty for running to an oil cooler. When you look at oil feeds, like power steering feeds, they're much smaller, and then just a larger hose size to move volume in less pressure. No need for -12. Even on the race cars, like Duncans, and endurance cars, most of them are all running -10 and everything works perfectly fine, temps are under control, and there's no restrictions.
    • Update: O2 sensor in my downpipe turned out to be faulty when I plugged in to the Haltech software. Was getting a "open circuit" warning. Tons of carbon buildup on it, probably from when I was running rich for a while before getting it corrected. Replaced with new unit and test drove again. The shuffle still happens, albeit far less now. I am not able to replicate it as reliably and it no longer happens at the same RPM levels as before. The only time I was able to hear it was in 5th going uphill and another time in 5th where there was no noticeable incline but applying more throttle first sped it up and then cleared it. Then once in 4th when I slightly lifted the throttle going over a bump but cleared right after. My understanding is that with the O2 sensor out, the ECU relies entirely on the MAP tune and isn't able to make its small adjustments based on the sensors reading. All in all, a big improvement, though not the silver bullet. Will try validating the actuators are set up correctly, and potentially setting up shop time to tune the boost controller on closed loop rather than the open loop it is set to now. Think if it's set up on closed loop to take the O2 reading, that should deal with these last bits. Will try to update again as I go. 
    • More so GReddy oil relocation kits, sandwich plates, etc. all use 10AN fittings. And same, I've only used 10AN and my car sees track work (circuit, doing laps, not 10 sec squirt business).
×
×
  • Create New...