Jump to content
SAU Community

Recommended Posts

Could someone tell me exactly what I'm looking at?

10000301ko.jpg

I don't know much about cars in general, and all I know about this one is it's a 1986 Nissan R31 Skyline GX. I bought it off a private seller for AU$2,000.

I'd like to know what all the bits are and what the performance should be like.

Cheers,

-Bazza :bunny:

Link to comment
https://www.sau.com.au/forums/topic/115624-what-am-i-looking-at/
Share on other sites

It's an RB30e, rather stock looking.

I'll take a stab in the dark and say it's an auto due to the lines running along the firewall, and it also appears to have cruise control.

You'll find pretty much everything you want to know about it here.

153.162 to be accurate.

114.3Kw x 1.34 = 153.162HP

I didn't think the .3 was really worth adding into the equation :)

Either way, it's more than enough power for an L plater, and certainly enough power to get you into (or out of) trouble.

Is it a GX, or a GXE model?

I love the dark blue 31's.... but I assume it used to be white?

If you paid 3k for it with the mags and kit already on it, you've done fairly well.

Dunno if you were after any suggestions on mods, but I'm going to offer a few anyway :)

Remove the Nismo badge and use it as a frisbee.

I was looking at the car thinking "nice, nice, nice....." then I saw the Nismo badge and my thoughts changed from "nice" to "rice" :P

Probably also remove the red thing on the drivers door (unless it's there to cover a scratch in the paint work). :rofl:

Change the centre garnish on the boot so that it matches the tail lights, or change the tail lights so they match the garnish.

It looks rather odd how it is. :ermm:

Do something about the exhaust. :(

Lower it.. a set of low Kings or similar... the 4WD style ride height detracts from the pimp factor of the body kit.

Is it a GX, or a GXE model?

GX

I love the dark blue 31's.... but I assume it used to be white?

It's black. :D and it used ot be cream, as indicated by the engine bay.

If you paid 3k for it with the mags and kit already on it, you've done fairly well.

I payed $2,000 after haggling.

Remove the Nismo badge and use it as a frisbee.

The original badges have gone ta-ta's so the Nismo badge will be staying for a while yet. :(

Probably also remove the red thing on the drivers door (unless it's there to cover a scratch in the paint work). :)

I tried to pull it off but it was leaving glue-marks so I just stuck it back on.

Change the centre garnish on the boot so that it matches the tail lights, or change the tail lights so they match the garnish.

It looks rather odd how it is. :rofl:

I think it looks different, which is exactly what I want this car to be: Different (and attention whoreing) :P

Do something about the exhaust. :P

I rekkon if I try to move it I'm gonna break off the bodykit.

Lower it.. a set of low Kings or similar... the 4WD style ride height detracts from the pimp factor of the body kit.

I like the ride height as is. IMO any lower would look like every other wannabe pimp with 20 inch chrome dinnerplates. :)

I want this car to be different, and to reflect myself. I do appreciate suggestions but I'm going my own way with this car.

untitled1ng.jpg

How would a spoiler such as this one I drew in MS Paint look in the boot? I was hoping I can find one where the legs would fit either side of the indentations on the boot and the wing would be the same width as the boot itself.

I think those lines are brake lines but he hasn't denied it's an auto.

You can take this as my denial :ermm:

1000021gc.jpg

Edited by The_Bazzanator
untitled1ng.jpg

How would a spoiler such as this one I drew in MS Paint look in the boot? I was hoping I can find one where the legs would fit either side of the indentations on the boot and the wing would be the same width as the boot itself.

1000021gc.jpg

Something like this! you trying to create???

That car is hideous :O.

And what can ya expect for a 20 year old car? XD

I don't want something quite that stupid. Imagine the spoiler on a V8 Supercar. Thats pretty much what I'm after.

And yes I am an attention whore so :rofl: .

Dont' forget that the boys in blue will also give you attention if you make it look dodgy.

I respect your intentions but please don't put that wing on it or any other wing apart from one factory released for an R31 Skyline.

I think tinting the windows would be a good idea for looks, coolness in summer and security.

btw, it wasn't me that suggested you had an auto.

That car is hideous :(.

And yes I am an attention whore so :rant: .

No worse than a black R31 with the shit you want to hang on it.

Remember your on L's and the law, even in SA just love clayton's hot shots like you want to be.

Maybe you should at least learn how to drive before you become another idiot behind the wheel.

It's my car, so I can do whatever I want with it, even if you lot think it's a bad idea.

If I do this right it shouldn't look that ugly... I never said I was going to put a 10 foot tall wing on the damn thing o.O

At least they're on HR31 Imports with what amounts to some real performance, but this guy wants to put them on a poxy old stock R31 and most people with any knowledge are just gunna laugh their heads off. But as he says, it's his car and he has the right to make a fool of himself if he likes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...