Jump to content
SAU Community

Recommended Posts

dont have the bolts sorry,

Dumps are yours let me know when you would like to come get them

I have actuators on the turbos but i dont really want to seperate them sorry.

Edit, will have Front Turbo Calipers, Front GTST Quarters and series 1 Bonnet all in black and in good condition in the next 2-3 months. As were building a Tube frame front end and fiberglass walk off nose for blacky.

Hey John, I'll take the passenger side front guard if you are willing to separate. Maybe the bonnet as well

yeah mate no worries, come on guys even if u want spares im moving house over the next 2 days really need to offload this stuff

also got 33 GTST Series one back seats, have heaps of interior bits if u need any?

Mud did u want to come get those shocks this arvo...?

UPDATE:

Today im going to throw out, rear 33 series one seats, all rear trim pieces, center console, 33 GTR VSpec Shocks if you want any of this ill keep it till about 6-7ish tonight... then its going in the big bin at work....

think i may also be throwing out boot carpet and side panels for a 33 gtst... probably more stuff call me and ask me what ive got and ill have a dig around....

not leaving dude, after winternats the car comes off the road to get a full tube frame end, and we are converting it too methanol, meaning ill be selling the injectors and just about everything that is on the front end of it.

Come to think of it, neone want a sumframe modified to take a VH45DE?? :evil: mmmm wonder what thats worth?

Bob jones: 6 pack?? there yours



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...