Jump to content
SAU Community

Wierd Noise During Cold Startup

mr_r33gtst
 Share

Recommended Posts

mr_r33gtst Rising Star

mr_r33gtst

Posted
Posted

I have a s1 r33 gtst.

Until a few weeks ago when i start my car when its cold, immediatle after the car is started it makes a high pitch scretch noise which last for about 1-2 seconds, then the oil pressure guage starts going up. SOunds comming somewhere in engine bay.Has this happened to any other skylines?

Car is not losing oil, or no coolant, and still drives normal, and cranks up normal, but dunno where the scretching noise is comming from. DOes not do it when the car is warm. Is it the starter motor?

Link to comment
https://www.sau.com.au/forums/topic/118516-wierd-noise-during-cold-startup/
Share on other sites
mr_r33gtst Rising Star

mr_r33gtst

Posted
  • Author
Posted
Check your belts.

Could be slightly loose, or it could just be a small amount of moisture from condensation causing a slight slip.

All belts seem tight..could it be comming from inside the engine block? i hope not

mr_r33gtst Rising Star

mr_r33gtst

Posted
  • Author
Posted

also right after i turn the key to start the car and just before the screech noise will sound the revs sort of struggles to go uo, and right after the screeching noise is done the revs will go up to normal about 1.3rpm when cold.. would not have a clue what it is, but the noise is very annoying

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
    • GTSBoy
      Speed Sensor replacement

      By GTSBoy · Posted

      Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...