Jump to content
SAU Community

Recommended Posts

Drift is on this sat and sunday at malalla . whos' going :D

Im possibly going this sat as working on sundays pays double {dont want to miss that} and might need some company in the gtr.

would be good to catch up with some fellow skyliners

Edited by savage GTR
Link to comment
https://www.sau.com.au/forums/topic/119002-drift-at-malalla/
Share on other sites

CHAPTER 4 – EVENT SCHEDULE

Saturday - May 27, 2006

07:30 Gates open

08:00 – 09:00 Admin checking / scrutineering

09:15 – 09:45 Drivers Briefing

10:00 - 12:00 Practice

12:00 – 13:00 Lunch break

13:05 – 13:45 Super Drift Series qualifying cars 49-64

13:50 - 14:30 Super Drift Series qualifying cars 33-48

14:35 - 15:15 Drift Australia Series qualifying cars 17-32

15:20 - 16:00 Drift Australia Series qualifying cars 1-16

16:05 – 17:00 Team Drift Practice & Qualifying

Sunday – May 28, 2006

07:30 Gates open

08:00 – 09:00 Vehicle Safety Check

09:00 – 09:20 Super Drift Series Warm up

09:25 – 09:45 Drift Australia Series Warm up

09:50 – 10:50 Super Drift Series Top 32

10:55 – 11:55 Drift Australia Series Top 32

12:00 – 12:30 Super Drift Series Top 16

12:30 – 13:30 Lunch break

13:15 – 13:30 DA Top 16 Driver introductions

13:35 – 14:05 Drift Australia Series Top 16

14:10 – 14:25 Super Drift Series Top 8

14:30 – 14:50 Team Drifting session 1 (Top 6 teams)

14:55 – 15:10 Drift Australia Series Top 8

15:15 – 15:25 Super Drift Series Top 4

15:30 – 15:40 Drift Australia Series Top 4

15:45 – 15:55 Super Drift Series Final

16:00 – 16:15 Team Drifting final (Top 3 teams)

16:20 – 16:30 Drift Australia Series Final

16:35 – 16:45 Presentation

16:50 – 17:00 Toyo Expression Session

I'll be going saturday and maybe a couple of hours sunday depending on what time my pop's lunch finishes.

Even if your not really into drifting this is pure entertainment and more than well worth the entry fee!

If there's a few people going saturday maybe we could organise a small cruise out there? I'll be leaving my house (near town) around 10am

Well i got an email from Autosalon and they want some cars for a show and shine IE clubs, indi etc. You get in for free, close parking, and a ticket to Fast and Furious new movie or something. It's only for 50 cars need to be there between 9 and 10 i think. So we could do an SAU one with a few cars.

Either way i'm keen to go up with a few of you boys

Well i got an email from Autosalon and they want some cars for a show and shine IE clubs, indi etc. You get in for free, close parking, and a ticket to Fast and Furious new movie or something. It's only for 50 cars need to be there between 9 and 10 i think. So we could do an SAU one with a few cars.

Either way i'm keen to go up with a few of you boys

hey bud its the guy with the 31 from the victor cruise. im up for the show n shine but sunday at this stage pm me with the details and if you want to meet up. ill have my car gleaming lol. lemme know how to register :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...