Jump to content
SAU Community

Recommended Posts

only problem with stock track r33's is that aint that quick, for fun fair enough, to be competitve i cant see it happening. And only because i have been there and done that.

you obviously haven't seen liz drive her old 33 at wakie :D

nah no need, i cleaned it heaps with that antibacteriol brown stuff....

and im up to date on all my needles soo i should be ok :D if i see infections im runnning to the doctor

Yeh i wouldn't step on something sharp and then just go 'oh wells'. You know you could have seriously ailed that nail. You should report it or sumsing before it spreads to other nails.

ok serious voting time, I shagged the auto in the pajero. it's well f**ked, rebuild is $2500

second hand auto is $1250 plus $550 to change it or I do it myself

manual conversion kit is $1350 plus fitting or i do it myself.

auto > manual is as easy as Silvia's/skylines.

What option should I take SAU

ok serious voting time, I shagged the auto in the pajero. it's well f**ked, rebuild is $2500

second hand auto is $1250 plus $550 to change it or I do it myself

manual conversion kit is $1350 plus fitting or i do it myself.

auto > manual is as easy as Silvia's/skylines.

What option should I take SAU

go the manual!!!!!

ok serious voting time, I shagged the auto in the pajero. it's well f**ked, rebuild is $2500

second hand auto is $1250 plus $550 to change it or I do it myself

manual conversion kit is $1350 plus fitting or i do it myself.

auto > manual is as easy as Silvia's/skylines.

What option should I take SAU

WHAT THE!!

how that f**k long have you had that thing?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...