Jump to content
SAU Community

Recommended Posts

Iv got a RB30 that i brought with the intention to put it into my R30 skyline but ive now lost interest in that idear and decided to turbo the motor that's in there.

It came out of a VL and surprisingly the head was not cracked or warped.

I will post most items at the buyers expense and organisation Ive got pics of everything so don't hesitate to ask for a pic if your (genuinely interested)

Major items (all prices negotiable)

.distributor with performance 8 and 9mm silicone leads $60 (sold)

.good clean set of N/A pistons and gudgeon pins do have rings but i don't know if there useable so there free with the pistons $100

.clean set of rods $80

.hand polished plenum in the usual places $40

.highly polished TB $30

.head in exeptional condition no cracks and not warped needs new studs and stem seals $130 (pic up prefered but i will post)

.series 2 block so its suitable to plumb a turbo ive pressure cleaned it and it's pretty much spotless needs a light hone and new welsh plugs i will include the crank and sump if you want the sumps got a fair dent in it but its probably fixable $130 (NO POSTAGE)

.AC compressor i think it's aftermarket it's a Sanden TR-70 turbo rotary, it's spottlessly clean $50

.auto ecu $20

.trip computer$30

.x2 cams and gears one better than the other $40 for the better one and $30 for the other one

.one set of lifters and rockers spottlessly clean they look like new $60 for the lifters and $40 for the rockers these come off of another head that i brought that was cracked i have the ones off this motor but there filthy and im not cleaning them and there missing one lifter cos i dropped it and it broke they would be ok after a good clean make an offer

.half polished fuel rail never got arround to finishing it $20

.flywheel $30

.x2 set of clean valves, springs, and collets $30 each set

.mint exhaust manifold with custom heat shield alot thicker that the stock ones and painted with red heat proof paint $50

.x1 set of freshly painted timing covers red with black stripes they look sick $30

.mint water pump and oil pump $40 each

.full set of head bolts $50 for the set

I think thats all the major items but its a complete motor so there is still heaps of good clean stuff left just ask

if yor interested in the block or head just call me Josh on 0431200311 after 6pm on week days and any time on the weekend

http://www.pixpond.com/1/wcm3uq.jpg (block 1)

http://www.pixpond.com/1/wcm3uq1.jpg (block 2)

http://www.pixpond.com/1/wcm42b.jpg (Head 1)

http://www.pixpond.com/1/wcm42b67.jpg (head 2)

http://www.pixpond.com/1/bn9hc.jpg (plenum 1)

http://www.pixpond.com/1/bn9hc88.jpg (plenum 2)

http://www.pixpond.com/1/38gmld.jpg (distributor)

http://www.pixpond.com/1/38gmld4.jpg (AC compressor, altinator, water and oil pumps)

http://www.pixpond.com/1/38gmol.jpg (cams, computors, lifters, and rockers)

http://www.pixpond.com/1/38gmol18.jpg (exhaust manifold and heatshield)

http://www.pixpond.com/1/38gmr5.jpg (water and oil pumps)

http://www.pixpond.com/1/cu7by.jpg (Pistons and rods)

you do realise that you can pick up a complete rb30 for under $100, ive even managed to pick one up for a caton, and yes it was a series two. anyway, good luck with your sale.

for $100 you can buy a f!#ked motor with a cracked head that would probbaly take alot of time to clean and check/test and all my prices are negotiable i realy didn't take the time to see what the going rates for all this stuff was so i just put what prices i thourght where reasonable

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...