Jump to content
SAU Community

Recommended Posts

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

I had just about beaten the 9.349 & now you tell me we can use TCS :)

That's bloody good, feel free to post up a non TCS time, it started as pretty much "whatever you need to do" challenge so any mods are fine. If you could get the launch perfect then TCS off would be faster I'd say but that is going to be pretty hard...

Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2230842
Share on other sites

That's bloody good, feel free to post up a non TCS time, it started as pretty much "whatever you need to do" challenge so any mods are fine. If you could get the launch perfect then TCS off would be faster I'd say but that is going to be pretty hard...

Ok. FULLY modded inc NOS but with the TCS & ACS turned off = 0'09.371. I'll post a screen shot when I can find my camera. Might try it with the TCS on & see what I get :P

Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2234644
Share on other sites

9.337 is just about as fast as i can get it

With that sort of time I'd say your tuning is spot in, I had to break away from convention (well maybe it's not convention) in tuning my gearbox to get any faster. Hint hint, 5 gear changes in 9 seconds might not be the fastest way down the 1/4...

I had a freak run too...

Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2234839
Share on other sites

With that sort of time I'd say your tuning is spot in, I had to break away from convention (well maybe it's not convention) in tuning my gearbox to get any faster. Hint hint, 5 gear changes in 9 seconds might not be the fastest way down the 1/4...

I had a freak run too...

so are you just holding the nos and accelerating flat stick the whole time?

thats how ive been doing it

so how many gears are you using over the 400m?

also are you guys using any ballast weight?

Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2234883
Share on other sites

The Launch is the trick, need to get that right, then flat stick with Nos all the way, auto box but holding some gears a little longer using the gear shift button, 5 gears, using a taller final drive to get that, I was maxed out in 5th over the line.

Luke

Edited by munchdesign
Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2234900
Share on other sites

The Launch is the trick, need to get that right, then flat stick with Nos all the way, auto box but holding some gears a little longer using the gear shift button, 5 gears, using a taller final drive to get that, I was maxed out in 5th over the line.

Luke

hmmm,

i was playing gt4 for about 4-5 hours last night, takes ages to get all the specs sorted.

i'll muck around with some of the specs and see how i go

Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2234944
Share on other sites

Never really found drag racing on GT4 that exciting.

I love taking the wagon around the dirt tracks. But my favourite is the Nurbergring. You have to set your car up spot on to get a decent time on that track.

If the car is too low, and suspension to hard, it is impossible to control over the bumps. If it is too soft, it just wallows and handles corners like a boat.

From memory, I managed a sub 10min lap in a standard RS4. I don't have a lot of time to play these days.

The PS3 is out in November (at this stage) and will cost NZ$1000.

Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2236258
Share on other sites

  • 4 weeks later...
  • 1 month later...

sussing some rim options... oh and has anyone got PB's for nurburgring yet, listen to munch qualifying tyres are the sh*t, GT4 has consumed so much of my life i have 384 cars at the moment that includes about every model nissan out the plus 24 different GTR's, 8 different stag's.... i like different colours and rims :thumbsup:

post-29140-1155439877.jpg

post-29140-1155439943.jpg

Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2405300
Share on other sites

  • 2 weeks later...

All Silver ones, can' be bothered taking pics of the other colours just yet, been playing heaps of 'Tourist Trophy' from GT makers only motorbikes if no one has heard, pretty good not enough game play tho, and pretty easy. Tips for anyone taking pics on GT4 turn the brightness up heaps in the game makes them a bit better.

post-29140-1156317627.jpg

post-29140-1156317695.jpg

post-29140-1156317865.jpg

Link to comment
https://www.sau.com.au/forums/topic/119868-gt4/page/3/#findComment-2432574
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...