Jump to content
SAU Community

For Sale: Sparco Rims With Falken Trackday Tyres

LTSJayce
 Share

Recommended Posts

LTSJayce Veteran

LTSJayce

Posted
Posted

Some already know,and for those that don't,my R32 GT-R is undergoing a restoration of sorts. More a serious upgrade,I s'pose. As such,the little beastie wont be turning a wheel in anger for a while yet,so I thought I'd off my trackday rims and tyres in the interim. They're Sparco Pythons,purchased from one of our good Canberra members who'll no doubt have all the spec's if I ask(as I've clean forgotten yesterday,let alone specifications like offset...). What I do know is:17" x 9",with the offset to fit the BNR32 with no clearance issues(my car is lower than standard,but sits just above legal road height...). Tyres are Falken RX-04V II's in 245/45/ZR17,which are a sticky trackday compatable rubber;not DOT approved,so you'd run the risk(and the wear issues)if you used them on public roads,especially if it rains! However,once heated up on the track,I dropped over 2 seconds off my Wakefield lap times,and there'd be more if I didn't drive like a nancy boy...So;cheap trackday rims that are a bit scratched and biffed up-nothing that appears structural,or I wouldn't have used them-with tread at 90%,including wheel nuts,for $1000 firm. PM me if needs be,and we'll go from there! Jayce.

Sparcofront.jpg

Tread.jpg

Sparcorear.jpg

Sinista32 Grand Master

Sinista32

Posted
Posted

A grand, You have got to be joking Jayce. There worth more than that without rubber.

Killer bargain if your in the market for wheels. Not to mention already set up with track tyres.

If I had a spare a grand you wouldn't have got this post up.

LTSJayce Veteran

LTSJayce

Posted
  • Author
Posted
A grand, You have got to be joking Jayce. There worth more than that without rubber.

Killer bargain if your in the market for wheels. Not to mention already set up with track tyres.

If I had a spare a grand you wouldn't have got this post up.

Thanx Sin'! I know they're cheap,but as they say in all those cheap a*se ads on tele':"They've got to go!" Meh:someone will get the bargain...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...