Jump to content
SAU Community

Recommended Posts

Hey people,

looking at a few r34 gt-t's. there are alot of hight km (100 000+) on the market at very reasonable prices. what are the life expectancy, risks, turbo life etc on say a mild mod, regular seviced vehical? how many km's have you done? and what problems if any have you incured?? and info would be appreciated. regards Damian :devil:

Link to comment
https://www.sau.com.au/forums/topic/122395-expected-engine-life/
Share on other sites

Hey people,

looking at a few r34 gt-t's. there are alot of hight km (100 000+) on the market at very reasonable prices. what are the life expectancy, risks, turbo life etc on say a mild mod, regular seviced vehical? how many km's have you done? and what problems if any have you incured?? and info would be appreciated. regards Damian :devil:

hey mate, i just recently bought a gtt, only done 34ks when i picked it up, and got it for $29.5k, insured with justcar, reasonable cost.. around 2900

3 year warrenty on all parts, is running great atm, high boosted it couple time, otherwise runs on 6psi..

watelse, got catback and couple aftermarket gauges and controller, pretty stock otherwise

hope this helped..

Mines done 86K and is still smooth as, even though i thrash it a bit. Feels similar to when i got it which was 60K. I change the oil rougly every 5K klms - note it isn't the smoothest 6 around so you may think it sounds rough when you first drive it. btw mine's fairly stock.

I would be quite surprised if the k's in the previous post are genuine (tho not sure of medel yr)- i wouldn't trust a pre 2000 model that's done less than 40K. Make sure you change filters and belts espicially if 100,000 service hasn't been done.

The expected engine life of all these RB engines are rated at at least 250,000kms. Read that somewhere, i'll try to put the article up.

The NEO RB25s are improved versions from the older RB25. The 34 shouldn't have a problem up to 300,000kms i reckon. Just look at those RB20s and RB26s in the R32 GTRs, most of them are still running really well even after 160ks.

My 2 Cs

I wouldn't place a huge focus on kilometers, for one thing most skylines odometers have been tampered with. When you test a car you can gauge by the condition of interior (wear on g/stick s/wheel, drivers seat, etc) and how it drives as to the condition of the car and engine, plus get a mechanical inspection. If the engine is in good running order, and u change oil every 5,000km and service every 10,000km you should have a very long running engine.

My family still has a nissan '82 bluebird with over 400,000km that still runs, despite not being looked after nearly as well as it could have been. Nissan engines are generally quite reliable and built to last and if well looked after will go for ages.

Just my 2 cents

Edited by r32line

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
×
×
  • Create New...