Jump to content
SAU Community

Forum Scammers?

GuestyR33

By GuestyR33,
in Victoria

 Share

Recommended Posts

MrAnderson Enthusiast

MrAnderson

Posted
Posted

im sorry for your friend but i really cant understand how someone would hand over 1k$ to someone who they have only talked to over the phone without at least investigating ways of making things safer - such as - registered and insured post or cash on delivery.... unfortunately u just cant trust people

  • 1 year later...
NickR33 Grand Master

NickR33

Posted
Posted

phew never been scammed... just lucky I guess!

I did buy a fuel pump from a forum sponsor that never arrived... it wasn't sent registered post but upon me contacting him to ask where it had got to the seller immediately sent another pump to me which arrived a couple of days later... he then said he would chase down the missing pump with Aus Post... that's pretty nice considering I could have just been lying that I never received it

Always pays to send it registered but sometimes the margins are so tight to be competetive in the parts market they try and save on the shipping etc

gdogzgtr Proficient

gdogzgtr

Posted
Posted

It is definitely a deception/fraud, in cases like this victoria police can't act as the offence takes place where the offender is which is Qld in this case meaning that investigation needs to done by Qld police.

I would suggest as other have get onto your bank and contact Qld police in relation to starting investigation into the matter.

adznight Newbie

adznight

Posted
Posted

It's simply not worth it for amounts under a couple of grand though Graeme, I had a similar problem with a Sydney resident. I had all the bank details, name etc. I lodged a report with Vic police who said they'd speak with the local police where the bank was located and nothing EVER happened, I didn't receive any correspondence at all. I called the bank in Syd and they could see the money sitting there and I applied for a reversal but get this - with Direct Deposit if you willingly transfer the money the recipient has to approve the request to return the money....yeah right. I can understand that there are 11ty billion petty matters like this for the police to deal with and that's why I think it's simply not worth it, they just don't have the time or care (well that's the impression I got).

stolen_s15 Mentor

stolen_s15

Posted
Posted

My uncle (top victorian barister) has just written a book on avoiding the pitfalls of online business. It details how to safely conduct transactions like the ones mentioned above, and if things do go askew how to ensure a quick and legally binding solution. It is designed specifically to show you how to protect youself from ruthless traders trying to use the internet as a cloak of invisibility.

If you would like a copy the cost is only $100 + 10postage. Cheap insurance for those of us spending thousands on expensive car parts.

PM me you address details and i'll send you my bank details, once funds have cleared I'll express post the book straight away.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...