Jump to content
SAU Community

Recommended Posts

2003 Nissan Skyline 350GT-8 sedan (V35) .. 8 speed CVT

The following car is currently available through a supplier in Japan - the price is 1,180,000 yen FOB which works out to be around $23,400 landed AND complied including shipping, import duty, GST and our service fee (excluding tyres & normal registration costs)

The initial payment should be around $11,700 for the FOB price, plus $1,000 for our service fee - other payments would not be due until after the vehicle arrives in Australia.

Pictures and details of this car can be viewed online here - http://www.j-spec.com.au/list/6792

Go to our main MAILING LIST page to check out other available vehicles from auctions, agents and dealers around Japan - the list is updated frequently and not all cars are sent out by email, so please check back often so you don't miss the bargains.

-------------------------------------------

2003 Nissan Skyline 350GT-8 sedan (V35) .. 8 speed CVT

3.5L V6 engine

Tiptronic

black

93,750 km's

No major accident history

Power steering

Power windows

Air conditioner

ABS brakes

Dual air-bags

Power front seats

Factory security system

Excellent condition all round

Continuously variable transmission

8 speed tiptronic with paddle shift

Auction grade 4 - report available on request

Very minor non-structural repair on left front

Left front headlight mount is cracked & repaired

This car will be suitable for SEVS compliance

More details & photos can be requested

Black 350GT-8 sedans are very rare, especially with leather/suede interior

This car is also well below normal market value for a car in this condition

Normally this sort of car would be worth around $35,000 landed and complied

... 1,180,000 yen FOB .. around $23,400 landed AND complied

-------------------------------------------

status.gif

The above landed estimates includes shipping, import duty, GST, our service fee, compliance and de-gassing the air conditioning system as required by the Dept of the Environment and Heritage - you will also need to allow for the cost of new tyres and anything else necessary prior to registration.

This estimate allows around $3,500 for compliance - please note that prices will vary depending on location and availability.

The examples you receive on our mailing list are only a very small sample of what is actually available in Japan each day, these are intended to give you an idea of the sort of cars that are out there ... we can only bid on cars once you have paid a deposit, so please only ask for more information if you are serious about buying.

th_1.jpg th_2.jpg th_3.jpg th_4.jpg th_5.jpg th_6.jpg th_7.jpg th_8.jpg

Please join our mailing list to receive details of these and many other cars available from dealers, agents and auctions in Japan.

If you wish to subscribe, please CLICK HERE

I should also mention that we have additional high resolution photos (1600x1200) available to anyone interested, so you can see the condition clearly prior to purchase.

Anyone seriously interested should note that there has not been a single black 350GT-8 sold in Japan at anywhere near this price in the past 6 months at least ... this really is a 'needle in a haystack' type deal.



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...