Jump to content
SAU Community

Recommended Posts

Just been down there (drive-ins) and the frequency for the movie tomoz night is FM 90.9 Mhz.

My Jap radio goes from 76-90Mhz, and Aus freq. Expander goes from 94-108Mhz... GGGGRRRRRRRR! - Portable Radio for ME! :P

If you're in the same boat as me... got a Jap stereo still in your car, sit in someone elses car... park next to someone with a good system and get them to turn there's up... bring a portal radio... or sit in silence!

Just thought I'd let everyone know... I hope this doesn't change ppls minds about coming... if it does... buy a FORD you knobs!

This is also my first TREAD! hooray for me!:)

cyas tomoz ppl who are coming!

Link to comment
https://www.sau.com.au/forums/topic/12589-more-info-about-the-cruisedrive-ins/
Share on other sites

Originally posted by phorj

Just been down there (drive-ins) and the frequency for the movie tomoz night is FM 90.9 Mhz.

My Jap radio goes from 76-90Mhz, and Aus freq. Expander goes from 94-108Mhz... GGGGRRRRRRRR! - Portable Radio for ME! :P  

If you're in the same boat as me... got a Jap stereo still in your car, sit in someone elses car... park next to someone with a good system and get them to turn there's up... bring a portal radio... or sit in silence!

Just thought I'd let everyone know... I hope this doesn't change ppls minds about coming... if it does... buy a FORD you knobs!

This is also my first TREAD! hooray for me!:)  

cyas tomoz ppl who are coming!

i thought that was the other field?

oh well... park next to the ppl with the big systems and leave ya window open

:)

The Aus frequency converters are dodgy then...cause our FM band ranges from 88-108Mhz [megahertz] so you will miss out on other broadcasts too - like 89.9, 90.5, 91.5 etc...

I changed my JAP unit over 2 weeks after buying the car to a locally bought pie-on-ear - partly cause of radio freq's...so I now have the full range [88-108]... unfortunately I aint going to the cruise / meet / drive ins... ah well

lol rub it in dale

i brought my whole system about 6 months before i got my car lol

still havent installed it all :P

got a 1200w 4channel amp in my closet.... a pair of 300w 6x9s also in my closet... mind u ive got a cooler sitting here also thats been here for about 3 months and ive owned for 7 haha

*pulls out a pic of dale on a table top in a gay strip bar*

well i found this... it fell out of ur car when we went to that cruise at pit lane in albert park.

:P:D

jk ur bf gave it to me to post up on every chat room i could fine

JK!!!

well there is a set of king cobras i havent used for over a year and a half... few old PCs.... some old basketball cards.... my rear seat.... and lots of other crap :D

ud have to be a tool if u left ur car off all night while the stereo was going... start it up every half an hour for 10mins.... i do it all the time.

inasnt im sure if it goes well we can organise another one.

I actually went down there *it is the question that drives us neo* I wasn't sure if my stereo would work or not... it doesn't!

Just went out and bought batteries for a portable CD/Rad/Cass I have... SH|T batteries are expensive these days!!!:P

Oh well what came you do?

I don't want to replace the stereo as i don't really listen to radio (this is the first problem I've had with it)... no to mention it is a double-din CD/MD/Radio (all fed through the head-unit) + it has CD AND MD stacker controllers!

tell me... what can you buy in Australia to compete... don't say MP3 player as i don't wish to scroll through 156 songs on the one CD to find the one i want!

cyas tonight

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...