Jump to content
SAU Community

Recommended Posts

Hi all,

just wondering if there is any way of hooking up an i-pod to the stock TV Nissan decks. It has an audio and video input at the front but I can’t seem to find a channel to run it on. Might have to change deck but want to waste money on engine mods first!!

Any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/
Share on other sites

Hi all,

just wondering if there is any way of hooking up an i-pod to the stock TV Nissan decks. It has an audio and video input at the front but I can’t seem to find a channel to run it on. Might have to change deck but want to waste money on engine mods first!!

Any suggestions?

are there any input selector on the deck? If its an external plug in like in front of the fase it should be AUX isnt it?

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331446
Share on other sites

no pictures am I missing something?

I think there is a control unti under the passenger seat might be some inputs on it. They may be RCA though so a 2rca to 3.5mm adaptor may be required otherwise it may be in the boot I cant remember there was a thread about this a while ago I think not about ipods mind but about the inputs

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331536
Share on other sites

here is a picture. i have a navigation system. could this be using the AUX channel. as it is no good to me i am going to disconnect it?

that i dont know where the nav is connected to. try to fiddle it if you cant bring it to an autoelec and see how much he will charge you for it and pay cash

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331538
Share on other sites

not sure how to put a picture up. just audio in and video in on side of screen. will check under seat to see what i can find. im sick of listening to AM radio

thanks

if you got an inpu of videa and audio it should work though. just have to find the right input in your selector.

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331554
Share on other sites

The tuner unit is in the rear quater panel on the passenger side and has an extra set of RCA inputs on it, that's what mine is like anyway. If you select VTR1 through the head I expect that is where the extra RCAs point at so with the right conections this may work... Not 100% sure if it will though...

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331650
Share on other sites

as long as you can find the inputs ie 2 rca inputs then you will be fine. any a/v store will sell adaptors dick smith tandy harvey norman etc what you are looking for as i said before is 2rca (ie left and right) to 3.5mm adaptor.

If it is not rca then it will most likely be a 3.5mm jack then all you need is 3.5mm to 3.5mm or worst case 2.5mm to 3.5mm otherwise I am all outa ideas

good luck

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2331765
Share on other sites

took head unit out today. put a converter in so i can get fm channels (easy to do with good results). heaps of wires at the back tried plugging ipod into all of them. cant seem to get it working. when i get my alarm put on i will get the guy to have a look at it for me. currently i was using a 3.5 - 3.5mm cable and putting it in audio in. cant seem to be able to find an aux channel to run it on. have a cd/vcd stacker i want wired in as well so i can play cd's and hopefully watch movies on screen. if not deck is going in bin!!

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2332677
Share on other sites

took head unit out today. put a converter in so i can get fm channels (easy to do with good results). heaps of wires at the back tried plugging ipod into all of them. cant seem to get it working. when i get my alarm put on i will get the guy to have a look at it for me. currently i was using a 3.5 - 3.5mm cable and putting it in audio in. cant seem to be able to find an aux channel to run it on. have a cd/vcd stacker i want wired in as well so i can play cd's and hopefully watch movies on screen. if not deck is going in bin!!

Hi Ben,

That last bit can be done but not that simple see here

Cheers

Luke

Link to comment
https://www.sau.com.au/forums/topic/126227-using-i-pod/#findComment-2333558
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...