Jump to content
SAU Community

Hi =]

FLYSKY1

By FLYSKY1,
in General Automotive Discussion

 Share

Recommended Posts

FLYSKY1 Apprentice

FLYSKY1

Posted
  • Author
Posted

didn't post for long time here but there's something happen to my car (not much but still something) and got some plans for it.

2_engine_1_1.jpg

engine is still stock but i've planned a nice project for my car (but seems to be that the engine inside my car will be stay stock for ne next years)

2_FLYSKY00001_1.jpg

2_FLYSKY00002_1.jpg

2_FLYSKY00003_1.jpg

2_FLYSKY00004_1.jpg

2_FLYSKY00006_1.jpg

2_FLYSKY00007_1.jpg

2_FLYSKY00008_1.jpg

2_FLYSKY00009_1.jpg

2_FLYSKY00010_1.jpg

2_FLYSKY00011_1.jpg

2_FLYSKY00012_1.jpg

2_FLYSKY00013_1.jpg

2_FLYSKY00014_1.jpg

2_FLYSKY00015_1.jpg

2_FLYSKY00016_1.jpg

2_FLYSKY00017_1.jpg

2_FLYSKY00018_1.jpg

on that day i've tidy up my garage and cleaned my car, so it was still time to take some pics when i have it outside :(

2_IMG_3808_1.jpg

my boost controller inside the ashtray :D

2_switch3_1.jpg

the switch is for the speed limiter

2_IMG_4013_1.jpg

finished hood (damn, took me a long time :))

that should be all for the moment, i'll keep u up about my plans soon.

Link to comment
https://www.sau.com.au/forums/topic/126416-hi/page/2/#findComment-3910909
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...