Jump to content
SAU Community

Series 1 Tail Lights

Hum@nzee

By Hum@nzee,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Hum@nzee Contributor

Hum@nzee

Posted
Posted

Hi - someone has damaged my lovely stag whilst parked outside my house! As well as modifying the driver's side body work, they smashed the corner tail light.

How available are these parts - I'm in the UK?

Any idea how much they cost?

Are the series 1 & 2 interchangeable?

cheers

John

Link to comment
https://www.sau.com.au/forums/topic/127079-series-1-tail-lights/
Share on other sites
GoldZilla Grand Master

GoldZilla

Posted
Posted

That sucks!

I believe the series 1 and 2 are the same shape, but s2 has clear indicator lenses instead of orange.

Not sure how hard it will be to source parts, but there are a few of us here who are hoping to replace their s1 taillights with s2 ones, but it all depends on the prices we can obtain for the update taillights (we're yet to find out).

Hum@nzee Contributor

Hum@nzee

Posted
  • Author
Posted

cheers for the info guys - I only need the driver's side corner lens - the bit on the tail gate is fine - if anyone hears of spare ones going - let me know if possible - I'll stick with the series 1 - be a lot cheaper I think.

thanks again

muck Community Regular

muck

Posted
Posted (edited)

series 2 will fit..... they require minor re-wiring.....

japanese auctions is also possible... corner lens are very reasonably priced for s1.. and plenty... im sure zac at slidewize can help you out.... he accepts paypal also...... shouldnt cost u much at all

Edited by muck
stasis Mentor

stasis

Posted
Posted (edited)

try yahoo auctions from the sliwiserimports link on the stagea section. Still cheap for you since your currency is pounds. let us know whats your outcome.

Getting a set might be cheaper option for you and just keep the rest as spares.

Edited by stasis
Hum@nzee Contributor

Hum@nzee

Posted
  • Author
Posted

Thanks again - great response - really appreciate it. Terminal - if I can't find a solution quick I'll talk to you about your set - won't hurt to have some spares anyway! I'll let you know what turns up. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...