Jump to content
SAU Community

Late 1992 R32 Gts (non-turbo) Manual

SAM112

By SAM112,
in Classifieds

 Share

Recommended Posts

SAM112 Grand Master

SAM112

Posted
Posted

I have a Sept 1992 non turbo R32. It's a limited edition V Selection II, which is one that came with some upgraded options, alloy wheels, CD changer, GTR steering wheel and a factory bodykit in celebration of Nissan Group A race victories with the Skyline GTR. The car has no major mods to it except a set of shiny stainless steel extractors and an exhaust system. It's my daily driver so I just wanted something simple and reliable to get me around in and not attract any attention.

I've since removed the CD changer and had a sound system installed into it. Alpine 160w rms splits in the front, some 6.5" rear fill speakers, a Nakamichi precision 1000Wrms 12" sub and a rockford fosgate amp to suit. The last two are in a custom made box made to fit into the R32 boot and still be removable easily in case I needed the extra boot space for carrying luggage/boxes etc. The car has a Viper alarm fitted (with 2 remotes). Its blackwired and has a 3 point immobiliser. It was fitted by Autotrust down in Melbourne. The alarm and the audio gear will be included in the car, with the exception of the head unit.

The car was bought from Kansai in Japan at auction (got all the reciepts) with around 50,000km's on it back in 2002, with service history and logs to back it up. The odo now reads just over 112,000km. It has a standard 2.0L RB20DE engine which makes a 120kw at the engine.

I live on the Gold Coast, the previous owner lives in Melbourne and owned the car for about 3 years, the car has been up here since mid December 05.

As for how much I want for it, I'm not sure to be honest. The car's not a 15 year old import and as a result had to meet some strict scrutiny when it came into the country, so I feel it's a better quality car than the cheaper ones. Also the car's not that common as its no longer eligible for import under SEVS, and 15 year old GTS's are few and far between. It is a good option for P-Platers who still want a Skyline, but not be hassled by the authorities. Its also a great daily driver as it is quite friendly on the back pocket as far as fuel efficiency's concerned, I usually get 10km to the litre of premium.

That said, the car owes me over 13k as it sits, but I know I wont get that much for it. The paint job alone cost me $4,200.. I'm totally flexible as I've only recently thought of selling it, so the prices are just a rough guide to show you what its worth.

The reason I bought the car in the first place is that my partner and I are buying a house so I wanted something cheap to run, but I've since had a pay rise smile.gif and driven some mates cars and decided to upgrade to something with more power..

I've no set price as yet, but say around 11,000 (previously listed at 12k). But I'm negotiable, so feel free to make an offer.

Thanks,

Samanatha.

[email protected] or PM

For pics Click here

Link to comment
https://www.sau.com.au/forums/topic/128197-late-1992-r32-gts-non-turbo-manual/
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...