Jump to content
SAU Community

Recommended Posts

I am selling my 33GTS-T so i do not require these items any more.The bar has been pre fiited to the car and removed for the sale of the car. The other items were planned upgrades to the car but have decided to sell the car and are new and unsed .

Item 1

R33 400R Front Bar . Unpainted, Extra glass added for strength in critical areas, Alum mesh panels for all openings in bar. Pre fiited to 33GTS-T.

$350.

Item 2

HKS Stopper Type Head Gasket for a RB25DET 1.6MM Thick . Lowers stock compression ratio approx .4 .

$350

Item 3

Oil Cooler Kit (EXCEPT HOSES) Consists of the following parts

19 Row Serck Oil Cooler (320x150x50mm)

4 X Speedflow Anodised 90Deg Dash10 Fittings

Sandwich Plate for RB Engines

2 X Speedflow Dash10 Adaptors for the Sandwich Plate.

$300.

Item 4

Turbosmart Wastegate Pro 45. Complete with "V" Bands and weld Flanges.

$400

Will Send Interstate at buyers expense or Pickup welcome.

PM Me for more info or Call on 0417779315

post-30848-1154751417.jpg

post-30848-1154751451.jpg

post-30848-1154751474.jpg

post-30848-1154751499.jpg

Edited by Sky95

The oil cooler kit has everything except the hoses and the mounting brackets for the cooler itself. I was going to make some custom brackets for the cooler and then get the hose after that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...