Jump to content
SAU Community

Recommended Posts

car was defected while a mate was driving and i have since taken it to have the defect cleared, basically was a major defect to be cleared by authorised blue slip place. any ways was for blow off valve, pod, inside of tyres being warn, and also check that exhaust complies to adr standards or whatever - check is not louder then 90dB and car to have full pit inspection, any way i took it to have the exhaust level checked, then took it to a blue slip place they said they were too busy directed it to some body else, the guy i took it to said even tho my exhaust was only 86.3dB he wouldnt clear it because its not standard he said i have to have an engineer check my emissions and do a thingy for me, any way i reckon its a bit bullshit, any one done this before, if the copper wanted my emissions tested would i have not been sent to epa? im yet to take it to another place for a second opinion

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/
Share on other sites

they usually send the EPA letter a week or so later. you'll probably get that soon.

as long as your car checked out to be under 90db and you had proof of that when you went to get the blue slip, then there was no reason for them not to pass you.

all you need to do is comply with the standard, not be standard. you might need to explain that part to them.

also, if you get the EPA letter i suggest clearing that before going for the blue slip.

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2386390
Share on other sites

A lot of places won't pass an exhaust on a defected car, as it can come back to haunt them. A vehicle really does need to be engineered if it has any modification which can change its emissions.

Having said that, you shouldn't have too many problems passing emissions as long as you have a working cat converter.

The advantage of having an engineers certificate, combined with legal modifications, is that when you get pulled over, you have absolutely nothing to worry about.

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2398104
Share on other sites

A lot of places won't pass an exhaust on a defected car, as it can come back to haunt them. A vehicle really does need to be engineered if it has any modification which can change its emissions.

Having said that, you shouldn't have too many problems passing emissions as long as you have a working cat converter.

The advantage of having an engineers certificate, combined with legal modifications, is that when you get pulled over, you have absolutely nothing to worry about.

any ideas on a good engineer who dosnt cost to much?

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2398958
Share on other sites

Hey PM me and I can get the bluey done for $100 my mate wont even really be looking at it ok, he is at Cherrybrook area, as long as it looks decent you will be fine, Ill just have to organise a day when i can take you down there if your interested???

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2400823
Share on other sites

wow, she came through.. Well done Jayla.. Nemz was telling me how mad you were.. Cheers

Well of course I came through did you expect differently???

Nemz owes me big time lol I went to alot of trouble to help him :0) just joking...

Anytime Nemz your cool...

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2423699
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And now the bloody flapper is jammed slightly open. Lazy as all f**k in 3rd-5th (very hard to convince it to make much boost before you run out of revs), but will make 12 psi in 1st, which shouldb't be possible with a 5 psi spring and controller set to <10 psi. Methinks I'm lucky it jammed where it did, rather than fully closed. It's actually a well weird situation. Careful examination of what's happening in the back of that housing when the gearbox comes out and all the other stuff (injectors, AFM retune) is supposed to be done, next week.
    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
×
×
  • Create New...