Jump to content
SAU Community

Recommended Posts

As the tittle says i want to stick a turbs on my daily :O , thinking just a smallish one just to make it more fun....... ;)

So if anyone has a small turbo in relative good working order they want to swap for beer or just plain want to throw my way, let me know. Was thinking of a ET pulsar or little Key Car turbs(micro turbs jap car) something thats worth stuff all and that will suit the little 1.3 4k motor! ;)

and

i will also be needing a turbo manifold if anyone knows of someone that is into thier old school Toyotas that might be able to assist that would be fantastic! :)

Hmmmmmmm actually i know this is a looooong shot but instead of a turbo i could go supercharged.......hmmmm well if anyone has one of thos puppies laying around too.

Cheers peoples

Darren

:)

i bet your thinking its for drifting expeditions

Well the rain will dry up soon won't it!!!

Hows the std manifold setup or do they run headers?

You may be able to easily modify the std manifold or the pipe that runs from it. :)

I considered this on an old asthmatic 82 626 mazda.. Then the motor died. :D

Not bieng too mechanically minded(at all actually) i think i can modify the std manifold!

I really don't want this too be a costly procedure, therefore only wanting a small crappy turbo and then work out the rest from there i reckon, but i think i may have a few more issues than that!

i'll see what my mates doing with his starlet! but it's a pretty small turbo!

Yeh sweet, small turbo is all good........ i really don't want anything too MASSIVE and i don't want her to blow up the lil 4k on start up :)

yeh see what he's doing with it and what he wants for it!!

Cheers

Have you got/sourced a blow through carby?

Chops check this thread i started in the WTB section, Crimmo has a pretty much full kit ready to bolt on to my stock carby! and really looks promising especially with the T28, Also spoke to Shaun about it today and he was saying it's still a good way to do it and he knew of someone that got about 95kw out of it........... Hmmmm Power to weight versus the 33, could be interesting! :)

http://www.skylinesaustralia.com/forums/in...howtopic=129252

go the supercharger route...................

can find them in plenty of wreckers who bring in frontcuts (I remember seeing them listed in HPI adverts all the time)

go the supercharger route...................

can find them in plenty of wreckers who bring in frontcuts (I remember seeing them listed in HPI adverts all the time)

i would dissagree little engines are better suited to turbos and will make more power not use power to turn the drive belts

Chops check this thread i started in the WTB section, Crimmo has a pretty much full kit ready to bolt on to my stock carby! and really looks promising especially with the T28, Also spoke to Shaun about it today and he was saying it's still a good way to do it and he knew of someone that got about 95kw out of it........... Hmmmm Power to weight versus the 33, could be interesting! :dry:

http://www.skylinesaustralia.com/forums/in...howtopic=129252

Sounds like a goer if the price is right mate.

Fun plus. Sleeper!

mate has 2 vg30 turbos in good nick just needs comp covers. i think there t25, would be good size prob. seperate!

all you need is a strong berg or some kinda side draught webber, cruide manifolds and 7ish psi mmmm..

go to u pull it and get 2.5 inch exhaust cut weld.. done on the cheap also may need some kind of fuel pump?

simple slidA!

Dont forget the LOCKA!

:P

mate has 2 vg30 turbos in good nick just needs comp covers. i think there t25, would be good size prob. seperate!

all you need is a strong berg or some kinda side draught webber, cruide manifolds and 7ish psi mmmm..

go to u pull it and get 2.5 inch exhaust cut weld.. done on the cheap also may need some kind of fuel pump?

simple slidA!

Dont forget the LOCKA!

:mellow:

Yeh well that was the other option.......... just find a webber, get marky to make me up a exhaust and while he's ther get him to lock the diff, and have a bit of fun that way..........especially on dirt, Hmmmmmm! options!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes to both! Yes to standard ECU and tune, but exhaust is aftermarket. Unsure on brand. Actually have it sitting in at my desk haha! I have to set it up on my laptop but this is a great next step, will do. So I generally try to shift before 4.5K RPM most times. I largely don't do a lot of high-rev driving, but I will take it up to red 1-2x a week max, as I know the occasional "Italian tune-up" is good for these cars.  Oh wow, is this way better than what I'm getting. Does this mean there's a good chance I have an issue?   Thanks for all the info so far guys.
    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
×
×
  • Create New...