Jump to content
SAU Community

Recommended Posts

Hey all,

Got a few parts that i was planning on using on a 32 GTR that i was building up. Have decided not to continue with the project so im selling off all the bits.

Click on pics for larger image.

Autonic SM4 computer (currently still in car) comes with crank angle sensor trigger disk and wiring ready to plug into 32gtr loom - $2100

Apexi AVCR - $550

HKS clear timing belt cover (never been fitted) - $120 -SOLD

Greddy gauges. Oil temp (needs new sensor), oil pressure, water temp and exhaust temp (SOLD PENDING PAYMENT). All electronic except water temp (mechanical) - $150 each -

Catch can and fittings/hoses - $120 (SOLD PENDING PAYMENT)

Apexi RX6 turbo kit. Includes turbo's, manifolds, dump pipes, oil lines, external wastegate and pipe, all cooler pipes - $3200

Tomei poncams (suit 32/33 gtr) 260 deg, 9.15mm lift - $950

Nismo adjustable fuel reg, bolts to standard rail - $130

Nismo adjustable fuel reg, used for aftermarket rail - $300

Sard 700cc injectors - $750

Sard rail - $400

Custom power steering fluid can inc hoses - $100

R33 400R front bar (fiberglass copy) not painted - $150 (SOLD PENDING PAYMENT)

HKS oil cooler and filter relocator (all braided lines) - $450 (SOLD PENDING PAYMENT)

HKS mushroom pod filter and mounts (only 1 filter) - $120 (SOLD PENDING PAYMENT)

Rays Volk Fortesst rims 19" x 9 1/2" with 2 x Falken 225 35 tyres (done less than 10k) and 2 x Bridgestone Potenza 235 35 tyres (doneless than 10k) - $3500

Im not in a rush to offload this stuff, so not stupid offers.

th_GTRside.jpg th_HKSoilcoolerkit.jpg th_Camssticker.jpg th_Apexikit.jpg th_400Rfrontbar.jpg th_48f2f975.jpg th_e321f8bd.jpg th_99451028.jpg th_aecf2219.jpg th_07b7307e.jpg th_3c6a0970.jpg th_9b9f9b12.jpg th_d2e8fbfb.jpg th_316eb4c3.jpg th_9638766c.jpg th_8f2e3b7e.jpg th_3fdecbde.jpg th_cd3cc586.jpg th_70bc3ac1.jpg th_Apexikit5.jpg th_exhaustwheel2.jpg th_compressorwheel.jpg th_Closeup2.jpg

Located in Melb.

Cheers,

Michael.

Edited by OBES
Link to comment
https://www.sau.com.au/forums/topic/129923-gtr-parts-aftermarket/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...