Jump to content
SAU Community

Recommended Posts

Hi guys.

I have a 95 type M R33 and i have a sunroof.

A question, when it rains what happens to the water if it gets into the sun roof channel. It seams like the back of my sunroof does not quite sit flush with the roof of the car, and if you press down on the sunroof a gap forms in the seal and the roof.

Is there any way of adjusting the roof to sit higher or something.

Has anyone got a pdf or something showing how this can be done. Some pics would be nice.

Link to comment
https://www.sau.com.au/forums/topic/130589-r33-sunroof-question/
Share on other sites

You can place extra spacers where the sunroof bolts up to the rails.

All you need to do is take the two plastic covers off, which are accessable from the underside of the sunroof and you'll see where the spacers are... just place more until it forms a better seal... I did the same.

If however, your sunroof seal looks worn and is cracking, i'd advise you to replace it as if you get water between that and the sunroof glass bit, the frame around the glass will rust (i had to replace mine).

As for where does the water go, there are drainage holes at each far corner of the sunroof frame, they allow the water to run out through hoses.

hope this helps

cheers

Liz.

HI can you bit a bit more specific in regards to the plastic cover part, not sure what you mean. I only have had the car for 3 days.

The seal looks great, no probs there, i just figured there would be an easy fix on the rail itself.

Do you have any scaned photos of the manual or anythign like that. I have a pdf on cd but i left it behind.

How do you actually remove the sunroof glasso out of the tracks, i need to clean the rails properly, the old greas sux.

Thanks

Yeah no worries.

Ok.. if you jump in the drivers seat and look from that angle you'll see a plastic screw on each side of the sunroof, undo them both and you'll find that the plastic cover will be able to be popped off.

Once you see how to do that, there is just three bolts on each side that you'll need to undo, after that, the glass bit of the sunroof just lifts out.

Sorry, I don't have any photos and i don't have the car anymore tog et any. But you should be able to see how to do it, just look for the plastic screws and you'll see the rest easily.

cheers

Dam it, ok so i get in the seat, and look towards the front or the side or back.

are the two plastic screws easily visable, i can't find anythign there.

Are you meaning the cover that has the swithes on it?

dam it sorry mate, like i said i have only had the car for 3 days.

Dam it, ok so i get in the seat, and look towards the front or the side or back.

are the two plastic screws easily visable, i can't find anythign there.

Are you meaning the cover that has the swithes on it?

dam it sorry mate, like i said i have only had the car for 3 days.

look directly up at the glass... and then look to the left and right of the glass and towarsd teh back of it, you'll soon see the covers and the plastic screw, one on each side.

if you still can't find it and you are near your car, pm me your number and head out there and I'll call and talk you through it.

don't worry, took me ages to work it out myself lol.

hay, ok so i had a look, and the only screws i see, are located on the sunroof plastic, on the actual glass part.

Does your sunroof go in and out and up and down, cos i am sure there must be a adjustment somwhere to do it, what i do for now, is once closed, simply bump the up swithc a bit and it's fine.

those are the screws that you need to undo to get to where you can place the spacers.... the glass will just lift out once you undo those screws, and the bolts that are hidden by them... you'll see the spacers I'm talking about once in there.. just need to find another spacer (or make do)

There is no adjustment to do other than what i have mentioned.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...