Jump to content
SAU Community

[fs] Brand New Complete Rb20/25 Intercooler Kit - Cheapest Price

DjeMz
 Share

Recommended Posts

DjeMz Mentor

DjeMz

Posted
Posted (edited)

Hey fellas

Details

Got this triply layer sealed core 600x300x75mm with stainless steel piping. It can hold up to 80PSI without boost leak. The piping kit comes complete with silicon joints, and stainless steel clamps. they will fit the cooler 100% perfect.

It can hold up to 80PSI without boost leak

600x300x75mm

front.jpg

innerside.jpg

side.jpg

RB20 Piping

photo3.JPG

photo1.JPG

Have piping for either RB20 or 25

Price is $380 ono

I will be able to ship it out for ~$20

Please PM me for contact details or post your post-code details for a quote on shipping

Edited by DjeMz
DjeMz Mentor

DjeMz

Posted
  • Author
Posted (edited)
I'll offer $150 plus postage for the piping kit. :D

$180 + shipping and its yours

the piping doesnt seem so sit flush in the engine bay?

If your talking about the rb20 kit, it does, that pic was taken from a mates car when we first installed it (we did it ourselves lol) it fits 100% fine..

If it duznt fit, send it back for a full refund

Cheers

Edited by DjeMz
Andi Experienced

Andi

Posted
Posted

$180 including post and I'll pay now. :laugh: PM me with details if you accept. This will fit an R34 GTT yes? Comes with everything needed to fit as well yes?

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...