Jump to content
SAU Community

Rays Engineering Nismo Lm-gt2 17" Rims & Tyres

strydes
 Share

Recommended Posts

strydes Collaborator

strydes

Posted
Posted

Selling my rims which will be available in approximately the next week (27th August-ish)

Rays Engineering Nismo LM-GT2's in 17x8 (+35 offset) and 17x9 (+38 offset) off an R33 GTS-t.

Very good condition with Kumho tyres all round (235 front 255 rear). Camber wear on the inside rears is a bit higher than the rest, but overall I would say about 50-60% all round. Done 17,000kms.

Very minor gutter rash on one of the rims, but only noticable on close inspection. The Nismo stickers have seem better days but the rims themself apart from needing a good clean are in excellent nik.

Inspection in Perth welcome, and closer photo's available on request for those elsewhere.

$1200 plus postage.

post-8519-1156150066.jpg

post-8519-1156150079.jpg

orbitor Rookie

orbitor

Posted
Posted (edited)

I'm interested, but can you get the exact offset for both the fronts and rears please? If it's not printed on the rim, then it's quite easy to measure like this:

http://www.rsracing.com/tech-wheel.html

Edited by orbitor
strydes Collaborator

strydes

Posted
  • Author
Posted

the rears are definately +38, and the front i'm 90% sure are the same, but both of the stickers are behind the calipers so it is hard to see in the dark.

i will confirm in the morning, but if it isn't 38 then it is 36.

orbitor Rookie

orbitor

Posted
Posted
front offset is 35.

fills out the guards nicely, should fit exactly the same on R32, R34, S14 and S15.

bugger, looking for a lower offset for my s13 :D Thanks for looking anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Yeetus
      98 R34GTT 4k engine stumble

      By Yeetus · Posted

      Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • GTSBoy
      98 R34GTT 4k engine stumble

      By GTSBoy · Posted

      Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...