Jump to content
SAU Community

Recommended Posts

---update----

Advans sold,

Nismo rims sold pending payment. other bits still available, offers considered

---------------

Hi,

Both sets are from R32 GTR's one set is currently on the car (Nismo).

One set of 17 inch ADVAN racing rims in gold. slight marks where the wheel nuts are put in otherwise perfect, as new. Comes with a full set of wheel nuts and very thin spacers that were on the car. Rubber: 2 brand new, 2 roadworthy but used(just put on for the car to pass rego). $1,900 or best offer. I was told they are worth over 2k but havent seen any others for sale so if this is unreasionable please let me know or make an offer, would also consider stock rims + cash.

NISMO 18 inch rims, white, made by rays engineering, genuine 2 party alloys. rubber passed RWC but not by a lot on the fronts. There is some scratches around the edges on all rims but it is not much deeper than the paint so would be cheap to repair if required. need to have wheels on the car so these would be trade for your rims plus cash if someone is interested.

ADVAN's:

post-21158-1156415183.jpgpost-21158-1156415352.jpgpost-21158-1156415430.jpg

NISMO Rims currently on car:

post-21158-1156415512.jpg

I also have:

brake master cylinder brace, anodised blue colour and

set of suspension, 2X vielside evolution height adjustable for the rear and 2X TIEN height adjustable for the front but I removed them from my previous gtr as the front TIEN's need refilling/seal after one started leaking. PM or post here if interested and i will upload pics and details.

contact:

(02)66333131 (martin) or

email: [email protected]

or just PM as i check almost every day.

pick up is prefered (Kyogle, near LISMORE in northern NSW) but i can arrange courier if required.

thanks for looking and please let me know if more info/pics is required.

martin

Edited by mmarschall

how much do you want for the nismo wheels? Width and offset please.

iv got a set of 16inch 2 peice wheels from 32 gtr with new tyres that im might trade. or give me a price outright and you can put the other ones on for the moment

Hi,

Sorry PranK, prices for all:

ADVAN's: $1900

NISMO's: $2500

Suspension: withdrawn from sale until someone can tell me what a reasionable price is or what it would cost to refill the 2 TIEN's?

Master cylinder brace: um, $200? if anyone can send me a link where i can find one for sale so i can beat the price as i have no idea on this one!? (will add a pic soon)

Also have a used brake master cylinder and booster which were from a wrecked GTR32, paid $250 for both, so start with that for a price, happy to seperate, offers considered

NEW Front Bendix Ultimate brake pads bought for a R32 GTR. paid $160. $130 ono (part no: DB1170 ULT)

To answer the questions on the rims size, the ADVAN's have the sticker pictured inside... no other details on them that i can see. The rubber is 235 but when i had it fitted the shop told me the rims are made for 245's (the 235's do stretch a little but are legal). offset? well they fit fine on an R32 gtr! can anyone tell me how to measure that? All 4 seem to be exactly the same size (no visible difference and tape measurements were identical

The NISMO rims have stickers (will post a pic shortly) with 18 X 1.0, of.+20, PCD 114.3 and "RAYS ENGINEERING" on it. Again all rims are the same size as far as i can tell but they do have different tyres front and back (255's on the back that stretch a bit and 225 or 235 (cant remember) on the front that are REALLY stretching to fit...).

thanks,

martin

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...