Jump to content
SAU Community

Jaycar Boost Controller,Fuel Adjuster,Turbo Timer


Recommended Posts

Been getting more and more PM's about when another group buy is gonna be on for these items from the last one... so I'm gonna be organising it while I have a little free time on my hands.

These are the kits discussed here:

http://www.skylinesaustralia.com/forums/in...showtopic=61207

The previous group buys I've done for these are here:

http://www.skylinesaustralia.com/forums/in...showtopic=66908

and here:

http://www.skylinesaustralia.com/forums/in...showtopic=74872

Prices are as follows (I've posted the prices depending on how many we get... eg if at the end of the group buy, I only have to order 1 EBC, then it'll be more expensive than 3 EBC's etc). All prices include GST.

productLarge_7575.jpg

Independent Electronic Boost Controller

http://www1.jaycar.com.au/productView.asp?ID=KC5387

RRP - $80

Group Buy Prices:

1 to 2 - $62

3 to 4 - $58

5 plus - $53

productLarge_8019.jpg

Digital Fuel Adjuster

http://www1.jaycar.com.au/productView.asp?ID=KC5385

RRP - $80

Group Buy Prices:

1 to 2 - $62

3 to 4 - $58

5 plus - $53

productLarge_7574.jpg

Hand Controller for Digital Adjusters

http://www1.jaycar.com.au/productView.asp?ID=KC5386

RRP - $60

Group Buy Prices:

1 to 2 - $48

3 to 4 - $43

5 plus - $40

productLarge_3605.jpg

RS232 (Parallel Port) Connecting Cable Computer Lead for Controller - 1.8m

http://www1.jaycar.com.au/productView.asp?ID=WC7502

RRP - $8.35

Group Buy Prices:

1 to 10 - $6

10 plus - $5

productLarge_7572.jpg

Intelligent Turbo Timer

http://www1.jaycar.com.au/productView.asp?ID=KC5383

RRP - $45

Group Buy Prices:

1 to 2 - $35

3 to 4 - $33

5 plus - $30

productLarge_7573.jpg

Digital Pulse Adjuster

http://www1.jaycar.com.au/productView.asp?ID=KC5384

RRP - $80

Group Buy Prices:

1 to 2 - $62

3 to 4 - $58

5 plus - $53

productLarge_7539.jpg

Performance Electronics for Cars - Silicon Chip Publications

http://www1.jaycar.com.au/productView.asp?ID=BS5080

RRP - $20

Group Buy Prices:

1 plus - $19 (w00t!)

If there's anything else from Jaycar that you'd like to add to your order ask and I'll get a price for you. Please reply with what you'd like in this thread, and feel free to ask any questions. In the past group buy guys have also ordered soldering irons and solder etc, which you'll need to put these kits together.

Please post which item you'd like, and what quantity. I'll set the cutoff for this group buy for the 17th of September (that's 2 weeks from now).

I found that shipping cost is around $10 across australia for a parcel post pack that holds most of these items. If you're in Sydney, then you can pick it up from me at a meet or something like that if you want to save on the shipping costs.

As soon as you reply with item name and quantities I'll PM you guys payment details and costs (you should be able to add them up yourself from the costs I've posted, but I'll PM you a total to confirm).

I'm closing this group buy on Sunday so I can put the order in first thing on Monday and hopefully have them shipped to you by Tuesday, for arrival by Friday... I hope. :laugh:

Deadline extended to the 1st of Oct

  • Replies 236
  • Created
  • Last Reply

Top Posters In This Topic

Put me down for:

1 x Independent Electronic Boost Controller

1 x Hand Controller for Digital Adjusters

1 x RS232 (Parallel Port) Connecting Cable Computer Lead for Controller - 1.8m

thanks

Put me down for:

1 x Independent Electronic Boost Controller

1 x Hand Controller for Digital Adjusters

1 x RS232 (Parallel Port) Connecting Cable Computer Lead for Controller - 1.8m

thanks

Put me down for the same...

Put me down for:

1 x Independent Electronic Boost Controller

1 x Hand Controller for Digital Adjusters

1 x RS232 (Parallel Port) Connecting Cable Computer Lead for Controller - 1.8m

thanks

same for me thanks.

There's no way for the Turbo timer to have a default time setting?

I don't think there is... unless you set the max idle time to however long you want, and then just put the sensitivity to max, so it thinks you need max idle all the time regardless of how hard you've driven it.

2 days to go people... the numbers look promising.

ducki, post up which iron and solder you're after (there's a few options) and I can give you a price on it. I get below retail on all of em, so just find the product code on the Jaycar website and post it up.

void, I'll be PM'ing everyone payment details shortly once we finalise numbers (just realised I said I was going to do it as soon as you posted a response... whoops).

ducki - have a look at the kit TS-1650, has a 25w iron (fine for pcb soldering), a stand, solder and solder wick for RRP$20

...it's an easy budge kit, I'm figuring if you don't have an iron you probably don't do this all the time so why spend a fortune!?

just a thought.

and f/m - cheers, just wasn't sure if I needed to chase that up to be part of the g/b or not... thanks

Edited by Mr Void

thanks for the suggestion Void. if this iron can be used to make this boost controller.. then put me down for the TS-1650 .. just thinking.. is the tip of the iron abit too big to solder or am I just seeing things?

Independent Electronic Boost Controller

QTY - 6 @ $53 each

Digital Fuel Adjuster

QTY - 1 @ $62 each

Hand Controller for Digital Adjusters

QTY - 5 @ $40 each

RS232 (Parallel Port) Connecting Cable Computer Lead for Controller

QTY - 3 @ $6 each

Soldering Kit (TS1650)

QTY - 1 @ $15.50 each

Mr Void, just wanted to make sure that you don't want a hand controller? You'll need it to set the EBC and DFA you've requested.

ducki the iron that comes as part of this kit is the Duratech 25W (TS1465)

productLarge_3824.jpg

and comes with this tip:

productLarge_3825.jpg

it should be OK for PCB soldering.

I'll be PMing each of you guys that responded in this thread your totals including shipping and payment details later today.

If anyone would like anything else from Jaycar, please let me know by the end of the day today.

Independent Electronic Boost Controller

QTY - 6 @ $53 each

Digital Fuel Adjuster

QTY - 1 @ $62 each

Hand Controller for Digital Adjusters

QTY - 5 @ $40 each

RS232 (Parallel Port) Connecting Cable Computer Lead for Controller

QTY - 3 @ $6 each

Soldering Kit (TS1650)

QTY - 1 @ $15.50 each

Mr Void, just wanted to make sure that you don't want a hand controller? You'll need it to set the EBC and DFA you've requested.

ducki the iron that comes as part of this kit is the Duratech 25W (TS1465)

productLarge_3824.jpg

and comes with this tip:

productLarge_3825.jpg

it should be OK for PCB soldering.

I'll be PMing each of you guys that responded in this thread your totals including shipping and payment details later today.

If anyone would like anything else from Jaycar, please let me know by the end of the day today.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...