Jump to content
SAU Community

Gb: R32, R33, R34 Skyline Carbon Fibre And Fibreglass Bits


Recommended Posts

yeah I am more than ready for my eyelids and bonnet lip

*taps foot at those who haven't yet paid and held up my order*

  • Replies 272
  • Created
  • Last Reply

Top Posters In This Topic

OK that's it.... we've all waited long enough - ORDER CLOSED!

This order that's about to be put through is:

2 x FG Bonnet Lips

3 x FG Eyelids

1 x CF B-Pillar Moulds

Simple...

* Those who missed out; please wait for the next order...

Money transferred... goods will be in transit as soon as the guy confirms receipt.

Once that's done; I'll shoot everything off to everyone ASAP!

  • 2 weeks later...

OK everyone, great news... courtesy of our fabulous international mail system, the order has arrived. It contains:

2 x FG Bonnet Lips

3 x FG Eyelids

1 x CF B-Pillar Moulds

I have personally checked all the goods in question to make sure nothing was damaged in transit.

PROBLEM: All but one set of FG Eyelids arrived safely. They must've dropped the parcel or something because one of the eyelids has a few fractures on it and a small chunk missing from the corner ;)

I am in the process of individually packaging the items... I have already sent an email asking for an immediate replacement of the broken eyelids (new set).

I will begin to send these items out next week; but for now please hang tight :D

Updates on broken eyelids to follow...

post-19974-1167345935.jpgpost-19974-1167345943.jpgpost-19974-1167345950.jpgpost-19974-1167345957.jpg

Sorry I just couldn't resist taking some photos last night - CF has that special attention drawing aura all the time ;)

Ive tried looking for R32 stuff in this thread (as the title says).......what is on offer? Front lips? front splitters? if there is some stuff available maybe an update of the first post is in order - beats reading 6 pages

Hey Steve,

The only items available for the R32 at the moment is the Wide Fenders in FG and the Headlight CAI

Thanks

post-19974-1167345935.jpgpost-19974-1167345943.jpgpost-19974-1167345950.jpgpost-19974-1167345957.jpg

Sorry I just couldn't resist taking some photos last night - CF has that special attention drawing aura all the time :mad:

I was going to ask how they looked! Can't wait to put them on.. :P

Items all packaged last night and sent off first thing this morning!

Rflirty4; thank you for your patience and offering to wait for the replacement eyelids.

Items all sent; tracking numbers have been emailed out as well...

I've confirmed the following new stock that has been freshly made so if you're after parts for the R34, sign up here:

5 R34GTT FG Bonnet Lips

1 R34GTT CF Door Sills (probably last set)

1 R34GTT FG Eyelid (not Rflirty4's replacement)

Thanks

Stan

Hey Steve,

The only items available for the R32 at the moment is the Wide Fenders in FG and the Headlight CAI

Thanks

Ok cool thanks - im set for widebody :P

CF Boots for the R34 are about $1,100.00 a pop in BLACK, SILVER or BLUE Carbon Fibre...

This is exclusive of freight which will be the obvious killer here...

I received my eyelids and bonnet lip this morning - they look awesome!!! Thanks a ton Stan!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...