Jump to content
SAU Community

Recommended Posts

I had an early day today so needing new tyres for the Skyline I went and visited Steve at Bob Jane Toombul. I wanted 4 Yokohama A539s and I had intended to book it in for next Saturday. But he had them in stock ready to go in my size 235/45 R17. So I crumbled and got them then and there.

Basically the straight saving on the tyres was about $85 on the cheapest quote I had gotten anywhere else. I also got the Nitrogen treatment and the works balancing at a discounted rate. All up a saving of over $100 and I have to say the car definately feels a hell of alot better. Shitty Federal tyres!

In conclusion, I am extemely happy with the service, happy with the discount, and very happy with the car 'feel' afterwards.

At this stage very satisfied and would like to thank Slip for organising this! THANK YOU!

P.S. Even got a 'free' Yokohama windscreen heat shield thingy. Cool! Oh, and I also got another Nitrogen sticker, anyone need one?

Link to comment
https://www.sau.com.au/forums/topic/13334-bob-jane-tmart-toombul/
Share on other sites

If you do some search on performance forums about A539, they are average tyres, no where near as good as older A509.

Yoko AVS ES100(no stock) and higher range are the ones I would probably go for. Then again each to their own so as long as you are happy its all good. :D

The old man has had both A509 and the A539 and he liked them both. He actually thought the 509s were a tad noisey.

I was initially looking at the ES100 but as you said, there is a bit of trouble getting them at the moment, and besides like most people all my choices are a compromise between what I want and what my wallet can afford. The ES100 were really stretching the budjet and I am assuming they would be quite soft so mileage wouldn't be that great. I know if I am not too lead footed that the mileage with the 539 should be ok.

Anyway, I have already done 1000k on the 539s and I can tell you the are light-years ahead of the Federals in ALL conditions. If the next step is just a big I would be impressed.

The only people I have heard complaining about 539s are people with small/light cars, I assume this is because of the 539s relatively hard compound??? The old man loves them of his Commodore, hated them on his Lotus S1 replica. That sentiment seems to hold true at the club sprint/hillclimb events we attend.

discount cards for all of qld will be provided with membership, but the Toombul store has gave those who attended the event VIP cards. The guys from Bob Jane have tried to send them to me on more than one occasion but something is happening along the line and we are not recieving the QLD discount cards. Still trying!

539's are a good tyre, but only on a properly set up car.

The discount cards for QLD will give you the exactly the same as these VIP cards.

Yup, 205/55/16 on the front and 225/50/16 on the back, and looking like clearance is no problems (with the super low/hard suspension). The reciept is in bris (and I'm not) but will pm you the price. I also got nitro gas. As always, they were great, and its a pleasure to drive.

QLD Raceway - here I come (also cruise on the 19th too, but racing was more fun)

Had to go to a wedding at Mt Mee on Friday. It started at 4pm, I got a puncture at 2pm. A peice of what looked like a bearing casing embedded in my tyre. Great, my tyres are only a 8 days old. Took it to Toombul on the space saver (not a good look) and they put it on the hoist straight away and repaired it for me at no charge! Still happy!

Guest WaNaSkYlInE

Hey ppls,

My mate just recently went over a speed bump at chermside shopping centre (in his R33), and by the sounds of things dinted (and may even punctured a hole)in his HKS exhaust. Is there any way you can fix it, or do exhaustes once there rooted have to be replaced. I dont think hes game enough to look at the real extent of the damage, cos of from what hes heard HKS exhausts are top quality and very exe? He said hes definetly lost power, and can sort of hear a whistling sound when he drives now, is this bad for the car at all? Just wondering whether there are any other BOB Jane Tmart meet ups in the near future?

i just got mine done at the local.. it was cracking where the pipe met the muffler at the back. they chucked it up on a hoist and were done in 5mins for free... twice..

quality not great, but i figure its going to keep happening so not going to waste big bucks on making it perfect every time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...