Jump to content
SAU Community

Power Fc Rattling?


bygrave316
 Share

Recommended Posts

Bro,

My PowerFC in my 34 GTR doesnt make any noise but i notice my hand controller makes alot of noise.

Just holding it up and shaking it around will give you sounds like its not put together well and like something is loose on the inside.

If im not mistaken, my PowerFC unit fits snugly..

I took apart the hand commander by the 2 screws behind and it just looks like the board is somewhat loose so i used some blu-tack and i wedged a few pieces around to make everything tight and compact and closed it back up and now its really silent.

Hope it helps!

Link to comment
Share on other sites

maybe a ticking relay? try watching ETC,SENSOR SW / CHECK when you notice the problem, do you see anything going on and off rapidly (block dot flashing)

ok ill give that a go when i go drive in a min...

if it is that what can i do about it?

Link to comment
Share on other sites

ok took the car for a drive and did the things u suggested paul.....

know went to 8 at the most and the sensor check didnt seem to do anything strange had some come on and off as i pushed the pedal but nothing flashing rapidly.....

anyone else got any ideas....

Im going to check to see that it is mounted really well shortly does anything in the unit cause it to vibrate if not mouted tight?

Link to comment
Share on other sites

Its a fast vibration sound and only happens when accelerating hard.

Maybe it only sounds like it's coming from the passenger footwell?

Checked your exhaust manifold lately? Still got all the studs holding it on?

Link to comment
Share on other sites

You didnt fit a Apexi boost control kit as well did u? I had mine in just last week n the solenoid valve makes a rattle when it comes on boost, alot louder than i expected. Apparently the Apexi valve is one of the loudest ones around so i was told.

Link to comment
Share on other sites

You didnt fit a Apexi boost control kit as well did u? I had mine in just last week n the solenoid valve makes a rattle when it comes on boost, alot louder than i expected. Apparently the Apexi valve is one of the loudest ones around so i was told.

this will be your problem, i have an avcr and it makes the same noise, farken annoying sounds similar to detonation, which freaks me out sometimes.

Some are louder than others, a good friend has one that's almost twice as loud as mine, next time your car is on the dyno try and get close to the boost controller solenoid, you will here that little tapping noise. ;)

Link to comment
Share on other sites

Yup rattles quick just as it comes on boost, its annoying so u may have to just put up with it. When i first had mine in, i thought it was my turbo wheel hitting the housing, took out the intake pipe, checked the shaft for play n was all good. Took me awhile but i soon realised that it was just the BC valve.

Perhaps a good pair subs will help drown the noise out......

Im trying to overcome the drone from my Blitz catback, now that's loud, even hurts my ears if im in the car for awhile...

yeah i got the boost control kit as well..... maybe it is when it comes on boost....

ill try unplugging it and putting it back in agian see how that goes

G Force is the rattle really quick and rappid.....?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • You won't make it out of your driveway. Both your rear wheels will go in whichever direction they feel. Your Hicas rack or a lockout bar is required to keep your wheels straight. 
    • Updating results.  Using ATR45SS-0 model VS UHF57-900. Those two are very different turbos, different wheels sets with different wheel hub profiles but yet with almost identical result. I’m intrigued with both turbos performance. ATR45SS-0 was a 61mm turbo first developed in May 2020, UHF57-900 was a 62mm turbo developed in March 2024 as a powered up alternative of a G30-900. On paper ATR45SS-0 maxed at 563rwkws, while UHF57-900 maxed at 568rwkws. ATR45SS was slightly more responsive with slightly better power band through the mid range.  Road driving ability, ATR45SS-0 had better throttle response, felt more robust under throttle, as it wakes up earlier. I think G series wheel hub design made it to have higher inertia under light throttle. Doing bit more prototype work in the next few weeks, will update result when its back on dyno again. ATR45SS0 Blue, UHF57-900 Red Chequered tuner's Dynapack hub dyno, E85 fuel. Mod list is in video below video_20240604_114214.mp4    
    • Did you run the power cables for the mac valve to the other side of the car near the fusebox? Utilizing the stock boost controller cables? or did you run new ones?
    • Hey I have a potentially stupid HICAS question 🤣 I'm currently doing a full hicas delete, Power steering pump modified to non hicas, all lines removed from the car along with all electronics. My stupid question is - Do I need a lock out bar? is there any reason why I cant just remove everything from the rear end? I already have a lock out bar but thinking to save a few extra grams I could also get rid of the arms and tie rods as well and just run it with nothing in its place? or would it have a negative effect on handling?
    • Hi how are you guys?  I know i have been absent for years but im coming back slowly guys just wondering if anyone know where the ball joint on the NISMO arm front and rear can be replaced with OE parts?  Also  i know this is not the thread looking for springs and blistein shocks for the 260rs. Please advcie     cheers    yudy
×
×
  • Create New...