Jump to content
SAU Community

Recommended Posts

HOWDY GUYS, I HAVE A POWER FC AND CONTROLLER, PULLED FROM MY 96 R33 RB25DET HAD ONLY BEEN ON THE CAR FOR AROUND 2000KS, CAR IS NOW SOLD, IT WAS FITTED AND DYNOED BY BOOST WORX IN ADELAIDE, THE CAR PULLED 197KW ATW, ON 10PSI,

( ALSO HAD FITTED A FRONT MOUNT, EXHUAST, AND POD FILTER AT THE TIME, NOT INCLUDED )

IT WAS REMOVED FORM THE CAR HAD PICS TAKEN THEN SEALED UP FROM DUST ETC, LOOKING AROUND $800.

( SOLD PENDING PAYMENT )

EBOOST VERSION 1, SAME DEAL ONLY DONE AROUND 2000KS, COMES WITH ALL FITTINGS AND HOSES, MANUAL ETC NO DAMAGE, ALSO THROW IN A AUTOMETER MOUNTING CUP, WAS REMOVED, PICS TAKEN THEN SEALED UP ALSO. LOOKING AROUND $400

ON EBAY AT THE MOMENT

GATES TIMING BELT BRAND NEW SUIT RB25DET ETC, ( BELT SOLD )

R33 SKYLINE SECOND HAND AERIAL, WAS BROUGHT FOR MY CAR BUT NEVER BOTHERED PUTTING IT IN $50

CAN EMAIL ME ON [email protected] FOR ANY INFO.

LOCATED IN WHYALLA, SOUTH AUSTRALIA.

Edited by boosted22
Link to comment
https://www.sau.com.au/forums/topic/134626-power-fc-eboost/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...