Jump to content
SAU Community

Wtb: R32 Drivers Side Guard

frigjam

By frigjam,
in Tasmania

 Share

Recommended Posts

frigjam Collaborator

frigjam

Posted
Posted

As the topic says, for a GTS-T not GTR.... Pref in decent nick and local (within Tas). Cheers.

Also, does anyone know if GTR guards will fit straight onto a GTS without changing the front bar? Looks a pretty simple swap to me. Because the other option for me is a set of GTR fibreglass guards that I can get for fairly cheap...

Paul

0428310449

Link to comment
https://www.sau.com.au/forums/topic/134990-wtb-r32-drivers-side-guard/
Share on other sites
DJRIFT Veteran

DJRIFT

Posted
Posted

i have a decent driver side front gard. but its still on my car :ermm: . but if you tell me where i can get some new guards from then ill sell you mine or you could buy some new guards and ill buy your good passanger side one?

just an idea let me know.

  • 2 weeks later...
frigjam Collaborator

frigjam

Posted
  • Author
Posted

It's not a cheap as I first thought for the GTR guards, I was given a price not inc shipping to Tas....

So really I just want a drivers side 32 GTS guard in decent condition, doesnt have to be perfect cond, it'll only be repainted. My car is dark blue, so a perfect dark blue guard would be even better :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...