Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just picked up datascan and cable last night and been playing with it this morning with my laptop. After being mesmerized by pretty blue and black gauges for about 3 mins I got bored and started to play around. So far I've...

Checked Error Codes - None WooHoo!!

Active Test Cylinders - They're all working

Speed Trial - <6 sec for 0-100 Nooooiice.

Now I wanna get to drawing the most out of the analogue displayed data. I've come across a couple of things and just wanted to know what was normal..

Water Temp is between 75-84 deg C

Idle Timing - Peak number is 15 but the gauge sticks at ten and then flashed to 15 once every second. Does this mean I'm running 10 or 15 or something else for timing?

Air Flow - Think I read somewhere that this ranges up to around 5V? Mine peaked at 4.9. Is this the sensor that instigates R&R? If so then at what point/voltage from the AFM does R&R kick in? If R&R does kick in does it generate an Error code?

02 Sensor - This appears to be reading the same as my autogauge air/fuel gauge which is cool...They are completely in synch. But is this linked to Closed TPS? Is the 02 gauge meant to be going back and forth crazily whilst closed TPS is off? Can someone please explain what closed TPS is?

Thermo Fan - I've probably got it wrong but isn’t the thermo fan supposed to kick in when the water temp reaches a particular point? If so what is that point? I tried to do an active test today by increasing the Engine Temp to 150 but the Thermo Fan stayed off according to the data display.

Any other help or pointers in getting the most value of this software would be great. I've searched heaps and heap of threads but cant really find specific info on how the product is used and explanation of the data.

Cheers in advance

Link to comment
https://www.sau.com.au/forums/topic/135660-consult-software/
Share on other sites

Umm.... Your timing will fluctuate with revs, that's normal. It doesn't jump too wildly at idle for me.

closed TPS. Closed Throttle Body Position Sensor. The sensor knows when the throttle body is closed, but closed loop should probably operate up to 2000rpms anyway. When driving over that, the 02 sensor still reads and sees the ratios, but the ECU doesn't use them.. it switches to the fuel maps.

Thermo fan... haven't tried tricking it on, but with hot weather and the A/C running, it will eventually come on. Hold out for a few days until it's REALLY hot.

The rest, depending on which software you're using, is just good for checking your motor now and then. Injector timing and pulse width, water temps and stuff like that.

GTR's have an intake air temp sensor, which is nice to look at. We don't have it though. The rest is self-explanatory, and mostly for diagnosing.

A/C relay on/off

Fuel pump on/off

Power steering on/off

etc etc.

You can stuff around with the timing too... although that could be risky biz without having some kind of knock-sensor readout. (we have knock sensors, but consult doesn't display them)

the ECU runs out of maps once the AFM hits 5v, so if you are only getting to 4.9 you are close but safe :)

The 02 sensor should move around heaps in closed loop running (ie when you aren't flooring it). The rest of the time it should just read rich (ie under 14:1)

Umm.... Your timing will fluctuate with revs, that's normal. It doesn't jump too wildly at idle for me.

What points does yours fluctuate between ? If I start my car and don’t touch the throttle the gauge skips between 10 and 15. So what is my actual timing? 10, 15 or somewhere in between?

Thermo fan... haven't tried tricking it on, but with hot weather and the A/C running, it will eventually come on. Hold out for a few days until it's REALLY hot.

Do you know at what point in degrees C it kicks in?

A/C relay on/off

What the A/C relay?

Power steering on/off

Is this supposed to always be on or does it turn on at certain point? Because mine says its off at idle but haven’t looked at it whilst boostn

we have knock sensors, but consult doesn't display them

That’s a shame......is there any consult software out there that does display some sort of knock reading from the stock microphone?

Thanks for the info about the AFM Duncan :nuke::D Will it show a +5V figure on the consult if it go's over or will the display just stick at 5...also Does the ECU generate an ECU error code when the AFM gets pushed over 5V?

Also, probably wrong thread but will excessive knocking also instigate R&R?

Well I can only answer 1 one of those questions, the afm records over 5v but the ecu doesnt know wtf that means so it goes rich and safe. I've never actually checked the error code after going over 5v, must do that some time.

The only peopel I know of that cracked the standard knock sensors are apexi with the PFC, they turn knock reading into a number which they display on the hand set....presumably the sound to listen for is different from engine to engine so its too hard/not worth it.

Well I can only answer 1 one of those questions, the afm records over 5v but the ecu doesnt know wtf that means so it goes rich and safe. I've never actually checked the error code after going over 5v, must do that some time.

Cheers Duncan.

Slightly off topic but do GTR's have R&R too?

What points does yours fluctuate between ? If I start my car and don’t touch the throttle the gauge skips between 10 and 15. So what is my actual timing? 10, 15 or somewhere in between?

>well.. it's variable inlet cam timing, so it's both, and intbetween. Mine does average around the 10 mark from memory. I'll have to plug the laptop back in and check.

Do you know at what point in degrees C it kicks in?

Nope, like I said, you'd probably have to wait for a hot day to see it come on.

What the A/C relay?

>Air Conditioning. Turn your A/C on, and consult should know about it. It's just a good diagnostic thing to check if your A/C stops working suddenly.

Is this supposed to always be on or does it turn on at certain point? Because mine says its off at idle but haven’t looked at it whilst boostn

>Power Steering? Turn the wheel a little bit on the spot, and it should show as "on". The engine may rev up a little.. that's what the sensor is for. Same with A/C... should rev up a bit to account for the extra load. My first car (VK Commy) worked all that off vacuum lines. One day that particular line had a split in it, so when I used A/C it would stall. I thought it was very strange how that worked.

That’s a shame......is there any consult software out there that does display some sort of knock reading from the stock microphone?

No, the ECU doesn't spit the info back out to the consult port, so no software can drag it out via consult. SAFC2's can be wired in to display knock.

The only peopel I know of that cracked the standard knock sensors are apexi with the PFC, they turn knock reading into a number which they display on the hand set....presumably the sound to listen for is different from engine to engine so its too hard/not worth it.

they are just allowing the knock sensor reading to be displayed. (theres 2 knock sensors or something? i think you can find them on the ecu pinout)

its quite possible there is still a way to read the knock sensor (or at least "is the ecu using knock maps?" flag), whether or not there is one, and whether itd be found is another thing. i have a few ideas to try out at some point. only thing is theyd be hard to test, given you dont actually want ur engine knocking...

Edited by NewKleer

Yeah 2 knock sensors but the sensor itself is just a sort of microphone. The trick is working out which frequencies mean knock.

And since the ECU doesn't output the signal - how can you get it out of the puter thingy?

the ecu may store its last read knock value somewhere in ram (which is readable via consult). so if it does anything useful with the knock sensor reading (ie convert it to digital form and store it in ram somewhere) its possible to read it (where or if its stored is likely to be specific to given ecu)

tricky bt is making up a circuit the ecu will interpret as a knock sensor (ie is knock sensor itself record/output a resistance, or a voltage?) so u can work out which ram address if any is responsible

Edited by NewKleer

lol... if someone could write it into their consult software, i'd pay for it!

Was it you or Mearcat that was working on the software? One of you terribly smart guys were!

Three things I want to see, but my car doesn't allow me to:

Knock

Intake air temp

AFR's (wideband)

I'm working on the air temp thing, with a thermocouple and compression gland, then i'll get an SAFC2 for knock readouts... the wideband part is just expensive. Dunno.

yep, thats ecutalk, and when i get time i might see if the above is possible

maybe u add this as a favourite to keep your memory in gear:

http://www.skylinesaustralia.com/forums/in...t&p=2347753

Edited by NewKleer

yeh im printing ur post out now so i can stick it on my fridge

kennedy - you mentioned your timing flashign from 10 to 15 - can u check ur closed TPS switch with datascan and see its on when ur foot is off the pedal (and stays that way). a 300zx i tested my consult lcd display on had a loose tps switch which sent idle timing back and forth from 19 to 35 (and sounded like something was up)

Edited by NewKleer
yeh im printing ur post out now so i can stick it on my fridge

kennedy - you mentioned your timing flashign from 10 to 15 - can u check ur closed TPS switch with datascan and see its on when ur foot is off the pedal (and stays that way). a 300zx i tested my consult lcd display on had a loose tps switch which sent idle timing back and forth from 19 to 35 (and sounded like something was up)

NK, I'm pertty sure that when i take my foot off the gas the TPS switch go's to off.

or the other way around (its a closed tps switch, so its "on" when ur off gas, and "off" when ur on gas). but yeh, if thats fine then ur timing thing is most likely just the ecu on the border between two different parts in the ign timing map.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...