Jump to content
SAU Community

Recommended Posts

  • Replies 168
  • Created
  • Last Reply

Top Posters In This Topic

Ill be there, plus 2 other skylines.

Is it limited to just skylines?

If not ill have a supara and a 180sx with me as well.

The more the merrier!!!

We have a couple of odd socks in our lot - there should be an S15 and a Subi with us.

BTW - where abouts are you leaving from and what time??? Is it the foreshore up the rd from the brewery? Some of us were thinking of driving up the drive back with you!? Dunno!

The more the merrier!!!

We have a couple of odd socks in our lot - there should be an S15 and a Subi with us.

BTW - where abouts are you leaving from and what time??? Is it the foreshore up the rd from the brewery? Some of us were thinking of driving up the drive back with you!? Dunno!

Hey Tinks, u forgot me!!!! :dry:

I am a maybe too, remember.....??!!! :P

BTW - where abouts are you leaving from and what time??? Is it the foreshore up the rd from the brewery? Some of us were thinking of driving up the drive back with you!? Dunno!

Check the first post in the thread for details of when we are meeting in the morning :dry:

Pink Bitz performance is having a cruise from Homebush Sydney to same location on the same day!

--------------------------------------------------------------------------------

I have come together with Illusive Motorsports to organise a Reconciliation Day Cruise.. Its to get all the teams together, old and new and put all the tension and bickering aside and have a fun day..

It will be a late meet up for all the lazy people who cant get out of bed early on a Sunday..

Date: 22nd October, 2006..

Meet up: P6 Homebush..

Time: 12pm, 12:45 leave..

Destination: Bateau Bay sports and Rec Fields (also known as EDSACC).

Stupid behaviour wont be tollerated, if your gonna act like morons, dont come, we want a trouble free day.

Should be a great day, hope to see all the regulars there.

It's pretty big I've been to a cruise to the same spot and there was about 300 or so. I think it holds about 500 cars. If there are any problems with the parking we can just go up the road to the bowling alley, there is plenty of parking and figure out what to do from there.

If all else fails we can drop into my dad's place for some paddock drifting and a bbq and beers hahahaha.




  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...