Jump to content
SAU Community

Recommended Posts

A private day for Skylines is unobtainable. The wont reply to phone messages, emails or letters.

WSID is run by a bunch of people who only care about V8's and top fuelers.

That said, if we didn't own Skylines we could get a private day for $10,000 with a list of rules and requirements that are practically impossible to comply with.

Link to comment
https://www.sau.com.au/forums/topic/136227-wsid/page/2/#findComment-2533051
Share on other sites

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

A private day for Skylines is unobtainable. The wont reply to phone messages, emails or letters.

WSID is run by a bunch of people who only care about V8's and top fuelers.

That said, if we didn't own Skylines we could get a private day for $10,000 with a list of rules and requirements that are practically impossible to comply with.

Now now Adam, settle down champion. I'm sure that in a decade or two we'll be sweet with WSID. :O

Link to comment
https://www.sau.com.au/forums/topic/136227-wsid/page/2/#findComment-2533157
Share on other sites

But isnt there another drag place that can be used? or is WSID the only place? :O

not in nsw there isn't. or are you proposing we travel to another state/country for a drag day?

Link to comment
https://www.sau.com.au/forums/topic/136227-wsid/page/2/#findComment-2533353
Share on other sites

I was actually in talks with the guys there,

said needed 40-50 cars and around 200 each

no under 11 second cars.

but needed to be booked months and months in advance

Long story short, don't bother. At least not on our behalf. Seriously.

Link to comment
https://www.sau.com.au/forums/topic/136227-wsid/page/2/#findComment-2533480
Share on other sites

Congrats to Mr Dinzlr on the 11.0, 10.8 and 10.9 passes thats 1 top sounding GTR!

Well done, Din. ;)

What was the mph?

Oh, btw Baron, I know why Ben goes to every WSID event ever held....and her name's not Wendy ;)

Link to comment
https://www.sau.com.au/forums/topic/136227-wsid/page/2/#findComment-2540832
Share on other sites

128, 128, 132.5mph from memory.

Mik got down to 11.2sec @ 128mph also from memory and afew GTS-t's from here doing 14's. Also Caz in the 300ZX did a mid-low 13sec in amongst all the other 300's out there.

No her name definitely isn't Wendy although she still melts in my hands.. ;)

Link to comment
https://www.sau.com.au/forums/topic/136227-wsid/page/2/#findComment-2540841
Share on other sites




  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...