Jump to content
SAU Community

Recommended Posts

hmmm... close to 4k with the GCG - i disagree.

Having been in Bass_Junky's car... i can say it has a fark load of mumbo @ 4k. As opposed to "coming on" at "4k"

That thing is as responsive as a stock turbo with an extra ~50rwkw

If you ask me, the GCG, cost vs gain... is the best bang for buck (~250rwkw) money can buy.

Everything else is proportionatly worse... meaning, one might not be "too bad" but there is "better" out there.

Its all budget dependant Phil.

Cheers - ash

very very right ash, i dont have the cash for the gcg or i will go that one, or even get a 3040 externally gated and pump over 250kw. But i think the slide highflow is "alright" considdering its just a small upgrade, and not a permanent mod. Its something i want to have fun with then ill go the big mother setup.

i definetely aggree that bass junkys car mumbo jumbo's all day and night and that the turbo he has will be a pretty aggressive piece of material.

Having said i want to go for the slide highflow, it is better than the one i have now, and i want over 230rwkw and close to 250rwkw for now, as i will be drifting car with high revs it will be pretty good all in all.

hmmm... close to 4k with the GCG - i disagree.

Having been in Bass_Junky's car... i can say it has a fark load of mumbo @ 4k. As opposed to "coming on" at "4k"

That thing is as responsive as a stock turbo with an extra ~50rwkw

If you ask me, the GCG, cost vs gain... is the best bang for buck (~250rwkw) money can buy.

Everything else is proportionatly worse... meaning, one might not be "too bad" but there is "better" out there.

Its all budget dependant Phil.

Cheers - ash

is that in reply to my post?

I was talking about the slide turbo. >_<

just in defence of the KKR turbos, i think its amazing that they have actually built a china turbo to last more than 10 mins!

furthermore, my friends RB25 powered laurel made 290hp at the wheels yesterday with the following modifications

fresh RB25 stock

stock injectors

KKR 430

FMIC

Exhaust

Nismo FPR

GTR pump

Apex PFC

Stock manifold

15kx5.jpg

Edited by andylaurel

info on the KKRs?

They are cheaper than new turbos should be

my buddy bolted one straight onto his motor with no mods and it pulls hard,

it hasnt died (yet)

it doesnt blow smoke (yet)

yeah the wastegate design is questionable, but his doesnt spike more than 1 or 2 psi on 1 bar. which is acceptable considering he's using a bleeder valve.

do those highflow turbos really make those numbers???

cos they are good numbers! and so cheap!

When you need to purchase the "Otomoto" dump, and its not a direct bolt on (thier own website, and other threads have been over this)

The overall cost to get a KKR onto a car is around $1500-$1700 depending.

IMO that suddenly makes spending the extra few hundred on something better pretty easy to stomach.

Sure the Chinese Turbo's are getting better.

Running them on a lightly tuned car with no demands is fine.

But if your thinking of further mods in the future, realiability might be a problem.

So I agree with Ash, spend the extra bucks for a proven formula .

Cheers :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...